Table of Contents
Advertisement
Chapter I. Installing the Scanner
Before installing your scanner, please verify that you have all of the proper
components. A list of the package contents is provided in the Box Contents section of
this guide.
Software Installation Requirements
Your scanner comes with the BCR software, the scanner's driver, and the BCR
Manager software. All of these software applications use approximately
megabytes of hard disk space after they are installed into your computer. To ensure
ample room for the installation, as well as for scanning and saving images, a minimum
of
200
megabytes of hard disk space is recommended.
The USB scanner can only operate under the Microsoft Windows 2000
Professional/ XP/ Vista operating system.
Caution
Hardware Requirements
This scanner connects to your computer through the Universal Serial Bus (USB)
which supports hot Plug and Play. To determine whether your computer is USB-
capable, you must check the rear of your PC to locate a USB jack that looks the same
as the one pictured below. Note that on some computers, the USB port at the rear of
the computer may be occupied and additional ports may be found on the monitor or
keyboard. If you are having trouble in locating the USB port on your computer, please
refer to the hardware manual that came with your computer.
Upon examination, you should find one or two rectangular USB ports, which
usually appear as shown below.
Please do not use multiple USB scanners in Windows XP
simultaneously! For more information, please refer to the following
URL:
http://www.microsoft.com
6
150
- Quick Links:
- Chapter I. Installing the Scanner
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
