Common -How-To- Questions - Plustek OPTICARD 611 (BUSINESS CARD) Manual

Cause 3: The scanner's power cord is not connected properly.
Solution 3: Make sure that the AC adapter is connected to an outlet. If the scanner
is connected to a Surge Protector, make sure that the Surge Protector is
turned on.
Symptom: The document or photo has been inserted into the scanner but is
not fed through the scanner.
Cause 1: The document or photo was not correctly inserted into the scanner.
Solution 1: Make sure the document or photo is properly inserted into the page feed
of the scanner.
Solution 2: The paper may be too think or too thick.
Cause 2: The thickness of the paper is out of scanner specifications.
Symptom: The document or photo got jammed while getting fed into the
scanner.
Cause: The document or photo was not correctly inserted into the scanner.
Solution: Grab ahold of the jammed paper and pull it through the scanner. Try to
avoid creasing, wrinkling or tearing the paper.

Common -How-to- Questions

Symptom: How do I save the scanned image in JPG format?
Solution: 1)
2)
3)
4)
Symptom: How do I cut an image and paste in another program?
Solution: 1)
2)
3)
4)
5)
6)
Please consult your program documentation on how to Cut and Paste if
you have any more questions.
Symptom: How do I place a scanned image into my word processor?
Solution: 1)
2)
3)
In the Image-editor, click on [File] and then [Save As].
Select the folder where you want to save your image.
Select JPEG or JPG under Save as type:
Type the name of the file name for your image.
Select the area that you want to cut.
Click on [Edit].
Click on [Cut].
Start the program and open the document where you want to paste
your image.
Click on [Edit].
Click on [Paste].
Find out what formats are supported by your word processor.
Write the name and the location of the file before you save it.
Save in a format supported by your word processor.
21