Prestige 662HW Series User's Guide
Table 20 Wireless LAN: 802.1x/WPA
LABEL
Wireless Port
Control
Back
Apply
Cancel
8.12.1 Authentication Required: 802.1x
Select Authentication Required in the Wireless Port Control field and 802.1x in the Key
Management Protocol field to display the next screen.
Figure 32 Wireless LAN: 802.1x/WPA for 802.1x Protocol
The following table describes the labels in this screen.
103
DESCRIPTION
To control wireless stations access to the wired network, select a control method from
the drop-down list box. Choose from No Access Allowed, No Authentication
Required and Authentication Required.
No Access Allowed blocks all wireless stations access to the wired network.
No Authentication Required allows all wireless stations access to the wired network
without entering usernames and passwords. This is the default setting.
Authentication Required means that all wireless stations have to enter usernames
and passwords before access to the wired network is allowed.
Select Authentication Required to configure Key Management Protocol and other
related fields.
Click Back to go to the main wireless LAN setup screen.
Click Apply to save your changes back to the Prestige.
Click Cancel to begin configuring this screen afresh.
Chapter 8 Wireless LAN Setup