Figure 43 Advanced Modem Setup; Table 29 Advanced Modem Setup - ZyXEL Communications P-662HW-61 User Manual

Prestige 662HW Series User's Guide

Figure 43 Advanced Modem Setup

The following table describes the fields in this screen.

Table 29 Advanced Modem Setup

LABEL
AT Command
Strings
Dial
Drop
Answer
Drop DTR When
Hang Up
AT Response
Strings
CLID
Called ID
Speed
Call Control
Dial Timeout
Retry Count
125
DESCRIPTION
Type the AT Command string to make a call. Example: atdt
Type the AT Command string to drop a call. "
example, " ~~+++~~ath " can be used if your modem has a slow response time.
Type the AT Command string to answer a call. Example: ata
Select this check box to have the Prestige drop the DTR (Data Terminal Ready)
signal after the "
AT Command String: Drop
Type the keyword that precedes the CLID (Calling Line Identification) in the AT
response string. This lets the Prestige capture the CLID in the AT response string
that comes from the WAN device. CLID is required for CLID authentication.
Example: NMBR
Type the keyword preceding the dialed number.
Type the keyword preceding the connection speed. Example: CONNECT
Type a number of seconds for the Prestige to try to set up an outgoing call before
timing out (stopping). Example: 60
Type a number of times for the Prestige to retry a busy or no-answer phone
number before blacklisting the number. Example: 0
~ " represents a one second wait, for
" is sent out.
Chapter 9 WAN Setup