Outsunny AB1-003 Quick Start Manual

AB1-003/AB1-004
fishing tent
Remove the fishing tent from it's case, placing hubs on the
ground.
fishing tent
IMPORTANT:
Close all Windows and
vents, and remove all
ice and snow from the
fishing tent before
take down.
Unbuckle strap and fold each corner outward to lay flat.
The fishing tent should now look like this.
Position the fishing tent over fishing hole in the ice, and
secure each inside corner of shelter to ice by screwing
one of the included ice spikes through the small loop into
ice. Push down while twisting ice spike until it gets
started, and then twist the spike until it holds fast.
Push in firmly on one of the center hubs of the outside
walls until it collapses inward. Continue around the
outside of the fishing tent collapsing all of the remaining
walls until the unit lays flat.
Lay the collapsed fishing tent down and use the attached
strap to hold all of the sides in as close as possible.
Find the side of the fishing tent that faces into the wind
and attach one of the provided straps to the center hubs
of that wall. Stretch the strap into the wind and with the
remaining Ice Spike(s), secure the strap to the ice.
Place the fish tent into the case hubs first and tuck all
materials in so that the zipper can be closed.