Page 6
EN_1. Open and flatten the tent, pass rods 1 and 2 of the same length through pipes 1 and 2 (diagonally cross each other), and pass a shorter rod 3 into pipe 3 correspondingly. FR_1. Ouvrir et aplatir la tente, passer les tiges 1 et 2 de même longueur dans les tuyaux 1 et 2 (en les croisant en diagonale), et passer une tige 3 plus courte dans le tuyau 3 correspondant.
Page 7
EN_2. Tie the webbing at both ends of the tent to both sides of the rear wheels to fix it. Put the two poles on the other end of the tent and tighten it with a wind rope. 3. Pull up wind ropes at the four corners on both sides of the tent and fix it. FR_2.
Need help?
Do you have a question about the A20-347V00 and is the answer not in the manual?
Questions and answers