Accessing The Answering System; Getting Your Messages - Uniden D1780 User Manual

To... Follow these steps:
1. Open the menu with the phone in standby. Select
2. Press
Record a
personal
3. Press
greeting
4. To keep the greeting, press
1. Open the menu with the phone in standby. Select
Switch
between
2. The system plays back the current greeting. Press
greetings
Delete your
Switch to your personal greeting, then press
greeting

Accessing the Answering System

When the phone's in standby, you
can access the answering system
from any handset:
• Only 1 handset can access the
system at a time.
• If you do nothing for 30
seconds, the phone returns to
standby.
• During remote access, the
phone beeps so you know it's
waiting for the next command.
• You can press the number key shown next to each command instead of
scrolling through the screens.

Getting Your Messages

To...
play new
messages
18 - English
Answering Setup, then
MENu/sElECT
says "Record greeting" before speaking.
MENu/sElECT
your new greeting.
press
MENu/sElECT
Answering Setup, then
to switch greetings.
sElECT
From the base
Press
Play/sToP.
The system announces the number of new & old
messages, then plays each new message (followed by the
day and time) in the order it was received.
Record Greeting.
to start recording. Wait until the system
to stop recording. The system plays back
END/ClEaR
.
Greeting Options.
Press MESSAGE/MUTE
remote operation mode.
1:Repeat 3:Skip
4:Delete 5:Stop
. To re-record it,
MENu/
END/ClEaR
to start
Press a correspond-
ing number key to
choose an operation
OR
to exit remote
END
operation mode.
From a handset
Press
MEssagE/MuTE
.
.