Installation Overview
Before you start:
Check the packing list inside this guide.
Check system prerequisites.
Step 1: Attach local language labels, if necessary
Step 2: Install the tape drive
1 Ensure the drive extractor lever is in the out position.
2 Slide the tape drive, locking lever at the bottom, into an empty bay of
an HP SureStore H/A Tape Array 5500. It needs to mate with the
connectors at the back of the bay.
3 Push the extractor lever in until it locks the drive in position.
On Completion
Power on the system and check that the tape drive is operational. Insert
the HP SureStore Tape CD-ROM. It contains drivers, backup software
and various utilities.
Register the tape drive
HP SureStore DLT
Installation Guide
For further
details, see:
page 1-2
page 1-3
page 1-3
page 1-4
page 1-5