Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Idis DC-T6631WRA
Summary of Contents for Idis DC-T6631WRA
- Page 1 Network Camera Quick Guide DC-T6831WRA DC-T6631WRA Powered by...
- Page 2 Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safeguards 1. Read Instructions 10. Overloading All the safety and operating instructions should be read before the Do not overload wall outlets and extension cords as this can result appliance is operated.
- Page 3 IDIS Co., Ltd. reserves all rights concerning this document. Use or duplication of this document in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited. Contents of this document are subject to change without prior notice for reasons such as functionality enhancements.
- Page 4 Installation Plate Allen Wrench Protect Connector Terminal Blocks (2ea.) Please download software (IDIS Discovery, IDIS Center, IDIS Solution Suite Compact) and product manual from this link : -https://www.idisglobal.com - Search IDIS Discovery, IDIS Center, IDIS Solution Suite Compact. Overview • Product color and design may vary depending on the model.
- Page 5 Body Insert a SD memory card into the SD memory card slot with the ‘micro SD’ print facing upward. Push the SD memory card until it disengages from the slot, and then pull it out. Close the cover and tighten the screws clockwise. Lens Sun Shield Screw Hole IR LED...
- Page 6 Installation The use of lubricant is recommended to insert the LAN cable smoothly. • Check the wall or ceiling to see if it needs to be Pull the cable slightly and arrange the rubber as reinforced. The camera may fall off if the wall shown below.
- Page 7 Connect the alarm, network and power adapter. Screw the network camera to junction box by using screws provided with the camera. Screw the camera sun shield to the camera using the screw provided with the camera. Screw the junction box to installation plate by using screws provided with the camera.
- Page 8 Angle Adjustment Dimensions 307.1mm 147.5mm 149.5mm Screw B Screw A Vertical (Tilt) Rotation Horizontal (Pan) Rotatio Lens Rotation 89.3mm...
- Page 9 Specifications Out-door Ready IP67, Heater Operating Temperature -40°C ~ 55°C (-40˚F ~131˚F) Boot Up Temperature -20°C ~ +55˚C (-4°F ~ +131˚F) Operating Humidity 0% ~ 90% Power Source , PoE(IEEE 802.3af, Class 3) Power Consumption , 1.1A, 13.2W PoE, IEEE 802.3af(Class 3), 57V , 12W Approval FCC, CE, IK10...
- Page 12 IDIS Co., Ltd. For more information, please visit www.idisglobal.com...
Need help?
Do you have a question about the DC-T6631WRA and is the answer not in the manual?
Questions and answers