Configuration: Network - HP AH164A - StorageWorks 1/8 G2 Tape Autoloader Ultrium 448 Addendum

Support Center website: http://www.hp.com/support/manuals. In the Storage section, click Tape
Storage and Media and then select your product.
Configuring the network with the RMI
Once the Autoloader is accessible over the network, you can configure additional network features from
the RMI. Some network features, such as SNMP, HTTPS, and IPv6 can only be configured from the RMI.
Configuration: Network
Use the Configuration: Network page to see and modify the current network configuration.
Figure 2 Configuration: Network page
4