Part Names And Functions; Front Panel - Sony AITE260 - AIT E260/S Tape Drive Operating Instructions Manual

Part Names and Functions

Front Panel

3
1
AIT Data Cartridge Receptacle
See page 24 to 25 for information on inserting and removing a AIT data
cartridge.
2
POWER Indicator
Lights while the drive is on.
3
Dust Cover
Prevents dust from entering the data cartridge receptacle. Keep this cover
closed when not inserting or removing data cartridges.
4
LED Indication for Drive Status
The LED indicators are defined as follows.
TAPE CLEANING
MOTION REQUEST
Independent
Independent
Independent
Independent
Independent
Independent Independent
on
1 pulse (0.9 sec on/0.3 sec off)
1 pulse (0.3 sec on/0.3 sec off)
1
Advanced
Intelligent
Tape
4 5
LED
REPLACE
TAPE
Independent Tape Loaded
Independent
Independent Tape Access in Progress (others)
Independent Cleaning is requested
Independent Cleaning is Not Completed
Slow
Fast
2
6
Sense
Tape Access in Progress
(write/read)
Media Error Occurred
H/W Error Occurred
Part 1. Introduction
15