HOMCOM ST-260 Instructions Manual page 6

EN
Never immerse the appliance, the plug or the power cord in water or other liquid.
•
Do not pick up the appliance if it falls into water. Remove the plug from the wall socket
•
immediately and do not use the appliance anymore.
Only use the base that comes with the jug kettle. Never use the base for other
•
purposes.
Remove the jug from the base, then fill it with tap water. Never fill the jug above the
•
'MAX' level.
Do not switch on the appliance before you have filled it with water. Fill only with cold
•
water.
The jug's lid must remain securely closed whilst the appliance is in use.
•
Never open the lid when the water is still boiling.
•
Use the appliance only to boil or heat water. Never use it for other liquids!
•
Fill the jug kettle with at least 0,5L of water.
•
Allow the appliance to cool to room temperature before storing.
•
Do not use the appliance through an external timer or remote control.
•
Caution! Hot water will cause burns if it touches bare skin. Be careful when pouring
•
boiled water.
To heat the water without boiling it, switch off the kettle at the time you desire.
•
OPERATION
For domestic household use only. Do not use it for commercial purposes.
FEATURE
1. Spout
2. Top lid
3. Lid release button
4. Handle
5. Water window
6. Power switch with indicator light
7. Power base
Before first-time use
Boil three full kettles of water, disposing of the water each time. This removes any
•
remaining residue from the manufacturing process.
USING YOUR KETTLE
1. Press the unlock button (3) to open the lid.
2. Fill the jug with the required amount of water (0.5-1.7L). Never fill the jug above the 'MAX'
limit. Otherwise, the hot water will spill over and cause a safety hazard.
3. Refit the lid. Always fit the lid when boiling the kettle.
6