Download
Share
Print this page
Yealink UVC40 E2 Installation Manual
  1. Manuals
  2. Brands
  3. Yealink Manuals
  4. Conference System
  5. UVC40 E2
  6. Installation manual
Yealink UVC40 E2 Installation Manual

Yealink UVC40 E2 Installation Manual

Hide thumbs
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
UVC40 E2 Installation
UVC40 E2 Installation
Package Contents
Package Contents
 TIP
TIP
We recommend that you use the accessories provided or approved by Yealink. The use of unapproved
third-party accessories may result in poor performance.
Use the Yealink original power adapter (48V/0.7A) to charge the endpoint only. The use of the third-party
power adapter may cause the damage to the endpoint.
1
UVC40 E2 Installation

Advertisement

loading
Need help?

Need help?

Do you have a question about the UVC40 E2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Yealink UVC40 E2

Summary of Contents for Yealink UVC40 E2

  • Page 1 We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in poor performance. Use the Yealink original power adapter (48V/0.7A) to charge the endpoint only. The use of the third-party power adapter may cause the damage to the endpoint.
  • Page 2 UVC40 E2 Installation Install UVC40 E2 Install UVC40 E2 Put on a Flat Surface Put on a Flat Surface Mount on a Wall Mount on a Wall...
  • Page 3 UVC40 E2 Installation Adjust Camera Tilt Adjust Camera Tilt...
  • Page 4 UVC40 E2 Installation mount on the tabletop mount mount on the tabletop mount mount above a TV or a display mount above a TV or a display...

  • Page 5: Hardware Interface

    UVC40 E2 Installation  NOTE NOTE The M-2 bracket can be inserted into the M-1 in two directions. Here, we take one direction for example. ue to device weight, it is advisable to avoid mounting the device on slim TVs to prevent potential falls or damage to the screen.
  • Page 6 Connect with VCM35  NOTE NOTE When connecting the VCM35, ensure that Network of the UVC40 E2 is disabled on the Yealink RoomConnect (disabled by default, default password: admin). Only then can the VCM35 be utilized. Connect with VCM36-W Connect with VCM36-W Pairing directly 1.

  • Page 7: Led Indicator

    2. Connect the Video Out port on the UVC camera/AVHub to the same PC using the USB-B cable. 3. Run the Yealink RoomConnect software on the PC. The Mute LED indicator fast flashes yellow duiring pairing. After paired successfully, the VCM36-W card appears on the Yealink RoomConnect software.