Related Manuals for Total TROSLI2001 Series
Summary of Contents for Total TROSLI2001 Series
- Page 1 PRODUCT MANUAL LITHIUM-ION RANDOM ORBIT SANDER TROSLI2001,UTROSLI2001 TROSLI2001xy,UTROSLI2001xy x(blank,1,2,3,4,5,6,7,8,9,E,S,A,M) y(blank,-1,-2,-3,-4,-5,-6,-7,-8,-9,E,S,A,M)
-
Page 2: General Safety Warnings
| English Original Instructions GENERAL SAFETY WARNINGS ⚠ Warning! Work area safety Keep work area clean and well lit. Cluttered and dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. - Page 3 | English Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool.
- Page 4 | English operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories, and tool bits etc.
- Page 5 | English BATTERY TOOL SAFETY WARNINGS Save these instructions. Caution: only use genuine original batteries. Use of non-genuine batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury, and damage. It will also void the warranty for the tool and chargerered and dark areas invite accidents.
- Page 6 | English Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life. Charge the battery cartridge with room temperature at 10°C-40°C (50°F- 104°F). Let a hot battery cartridge cool down before charging it. Charge the battery cartridge if you do not use it for a long period (more than six months).
- Page 7 | English THE SYMBOLS IN INSTRUCTION MANUAL Double insulated for additional protection Read the instruction manual before using. CE conformity. Safety alert. Please only use the accessories supported by the manufacturer. Wear safety glasses, hearing protection and dust mask. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
-
Page 8: Additional Safety Warning
| English ADDITIONAL SAFETY WARNING Instructions how to deal with harmful/toxic dusts arising from sanding e.g. lead painted surfaces, woods and metals. These instructions shall be proceeded by a warning that contacts with or inhalation of these dusts can endanger the health of operator and bystanders. These instructions shall include the use of appropriate personal protective equipment. -
Page 9: Specifications
| English SPECIFICATIONS 1. Hand grip area 4. Rotary sanding plate 2. ON/OFF switch 5. Vacuum adaptor 3. Dust bag 6. Sand paper... -
Page 10: Technical Specifications
| English Technical specifications UTROSLI2001, TROSLI2001, UTROSLI2001xy TROSLI2001xy x(blank， Model No. x(blank,1,2,3,4,5,6,7,8,9,E,S,A,M) 1,2,3,4,5,6,7,8,9,E,S,A,M） y(blank，-1,-2,-3,-4,-5,-6,-7,-8,- y(blank，-1,-2,-3,-4,-5,-6,-7,-8,- 9,E,S,A,M) 9,E,S,A,M) Bottom 125mm (5˝) size No-load 10000/min speed Rated voltage Input 220-240V~50/60Hz 110-120V~50/60Hz voltage • Due to our continuing program of research and development, the specifications herein are subject to change without notice. - Page 11 | English ⚠ Warning! Only use original battery pack and battery charger as below for this power tool: x (blank, 1, 2, 3, 4, 5, 6, 7, 8, 9, E, S, A, M) y (blank, -1, -2, -3, -4, -5, -6, -7, -8, -9, E, S, A, M) TFBLI2001 TFBLI2002 TFBLI2053...
- Page 12 | English OPERATION PICTURE...
-
Page 13: Function Description
| English FUNCTION DESCRIPTION ⚠ Caution Before using the tool, read the instruction book carefully. Intended use The machine is intended for dry sanding of wood, plastic, metal and filler material as well as painted surfaces. Machines with electronic control are also suitable for polishing. Assembly 1. -
Page 14: Operation
| English OPERATION 1.ON/OFF Switch (see Dia E) To start your sander, depress the protective cover over the switch indicated by the mark "I". To stop your sander, depress the protective cover indicated by the mark "O". 2. Sanding surfaces Place the machine with the complete Sand paper on the surface to be worked. - Page 15 | English The higher the grade number, the finer the grit. For rough work start with a low grade of grit. (e.g. 60 grit) and change to a higher, finer grade (e.g. 120 grit) for finishing. If you use a fine grade for rough surfaces it will soon clog and need changing. It is best to make a trial run on a scrap piece of material to determine the optimum grades of sandpaper for a particular job.
- Page 16 | English MAINTENANCE&MALFUNCTIONS Possible malfunctions and methods of their eliminations Malfunction Probable causes Actions ● Switch failure ●The power cord or wiring is broken, Disconnect When the machine is turned power cord plug malfunction; machine from the on, the electric motor does ●...
- Page 17 TOTAL TOOLS WORLD MADE IN CHINA T0523.V02 TOTAL TOOLS CO., PTE. LTD. No. 45 Songbei Road, Suzhou Industrial Park, China.
Need help?
Do you have a question about the TROSLI2001 Series and is the answer not in the manual?
Questions and answers