Canon imagePROGRAF TC-21 Installation Manual page 19

Safety Precautions
About the Printer Stand
If you are purchasing an optional printer stand, please observe the following caution.
When using a printer stand with the Canon TC-21 printer, follow the instruction manual
to securely attach the printer to the stand. Furthermore, always use the following
combinations.
For Canon Printer TC-21, use Canon Printer Stand SD-24.
Using a different combination of printer and stand than shown above, using a printer
stand not listed above, or not attaching the printer securely to the printer stand may be
unstable and may result in injury.
Handling Cautions
Power Supply
● Do not disconnect the power plug while the power light is on. There is a risk of a
malfunction occurring in the print head that makes it impossible to print cleanly. When
removing the power plug after turning off the power, check that the power light is off.
● Keep the area around the power outlet clear of items so that you can disconnect the
power plugs immediately.
● Always grip the plug to remove the power cord from the power outlet. Pulling on the
power cord could damage the cord.
Ink
● Handling of malfunctions caused by using ink other than genuine Canon ink is not
covered by the warranty.
● The use of ink other than genuine Canon ink may cause degradation in printing quality
or damage to the print head.
Note: For details on refilling the ink, refer to the Online Manual.
● If only a small amount of ink is refilled, the remaining level detection might not
function correctly. Make sure the
the does not turn off even after refilling all of the ink from the bottle you have, get
another bottle and refill using that.
19
ENGLISH
is off after refilling the ink and closing the cover. If