Table of Contents
Advertisement
38
Navigation
Route options
Plan route guidance and calculate route list
In the navigation basic menu the route guidance can be planned
and/or a route list can be calculated via the menu field "Route
option".
– Mark and confirm the menu field "Route option" in the navi-
gation basic menu. The menu for the route option is called up.
– Select another setting in which first of all the desired menu
field is marked and confirmed. The respective current setting
is shown by a highlighted triangular with highlighted lettering
⇒ fig.
– Select if the received traffic reports should be taken into
account for the route calculation and the guidance
– Mark and confirm the menu field "Route list".
The message "The route list is calculated. Please wait" is indicated.
The calculation process can last several seconds depending on the length
of the route. Afterwards the route list is made.
Fig. 29 Route options
The list of the respective stretches of the journey is shown permanently on
the screen. The respective stretches of the journey are shown with the
corresponding length indication. The route list is updated if there is a
change in the route. In the list the stretches of the journey to be driven are
shown upto the destination with the corresponding length indication.
If the dynamisation function was activated, the route option can be
changed. A corresponding note appears in the display.
•
Menu field "Route" - here you can select if the calculation of the route
should be optimized according to the driving time or according to the
distance driven
•
Menu fields "Motorways", "Ferries" and "Toll roads" - here you can
Fig. 30 Menu field -
select if the route with the named traffic path should be calculated or if it
Dynamisation
should be avoided.
•
Menu field "Route option" - this menu field makes it possible to store
the set route option as standard setting.
29.
⇒ fig.
30.
Hide quick links:
Advertisement
Table of Contents
