Download Print this page

PROTEOR PLIE 3 Owner's Manual

Microprocessor knee

Advertisement

Quick Links

Warranty and Service
The Plié 3 MPC Knee has a 36 month warranty and includes two
service intervals, 12 and 24 months after purchase. Service is
required to maintain warranty validity. Your prosthetist will
contact you to schedule an appointment when it is time to
receive knee service. You will be provided with a loaner knee
unit while your knee receives service.
Care & Use
The Plié 3 MPC Knee is safe for occasional submersion in fresh
water up to 1 m (3 ft) for up to 30 minutes. You should dry the
knee with a towel once out of the water. The Plié 3 MPC Knee
should not be immersed in saltwater or chlorinated water as
these may cause corrosion. Failure to comply will void the
warranty.
If unintentionally exposed to chlorinated and/or salt water
environments, the knee should be rinsed with fresh water.
While the Plié 3 MPC Knee withstands moist environments,
excessive use in wet conditions may result in corrosion and/
or undesirable operational noise. If the knee requires general
cleaning, wipe the outside surfaces with a cloth and rubbing
alcohol. For further information about how to care for you
Plié 3 MPC knee, please contact your prosthetis.
If the Plié 3 MPC Knee is physically damaged or
does not function properly, immediately contact
your prosthetist.
© 2024 by PROTEOR | All rights reserved. Plié® 3 MPC Knee is a trademark of PROTEOR
Focused Solutions
PROTEOR is solely focused on developing world-class lower limb solutions in close
collaboration with amputees and prosthetists. These solutions encompass
technological innovations, service, training and educational resources, together with
consultative support, to help ensure user satisfaction
High elevations and cold temperatures will a ect the knee's internal air pressure. In
these conditions, you may be required to increase the air pressure to resume normal
function.
Without power, the Plié 3 MPC Knee will not release into swing phase. In this
powered-down mode, the knee will default to the stance exion resistance setting.
Insert a charged battery to resume normal knee function.
Use only the batteries and battery charger intended for use with the Plié 3 MPC Knee.
During repetitive activities without swing phase, such as the use of exercise
equipment, turn the stance exion resistance setting counterclockwise to the
"O " position with a 4 mm allen key. After the activity, adjust the stance exion
resistance to its previous setting.
Global Headquarters
US Headquarters
6 rue de la Redoute
1236 West Southern Avenue,
21850 St Aplollinaire
Suite 101
France
Tempe, AZ 85282
phone: +33 3 80 78 42 42
phone: 855.450.7300
www.proteor.com
us.proteor.com
CG-03-002, REV D
Plié® 3 MPC Knee Owners Guide
MICROPROCESSOR
KNEE
Owner's
Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the PLIE 3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for PROTEOR PLIE 3

  • Page 1 Tempe, AZ 85282 phone: +33 3 80 78 42 42 phone: 855.450.7300 www.proteor.com us.proteor.com © 2024 by PROTEOR | All rights reserved. Plié® 3 MPC Knee is a trademark of PROTEOR CG-03-002, REV D Plié® 3 MPC Knee Owners Guide...
  • Page 2 Pli é 3 Owner’s Guide Adjustment of Swing Extension Assist Battery Cap Closed The knee should be used with the air pressure between 20 and 100 psi (140 to and Heel Rise 690 kPa). Remove the air pump by pulling the the tip out of the port. You may hear a *FFFT* sound, this is residual air escaping the pump hose.