Skoda FABIA Owner's Manual page 67

66 Seats and Storage
– Then push the seat backrest back into the upright position until the
securing knob clicks into place - check by pulling on the seat backrest.
– Make sure that the red surface of the securing knob
⇒ fig.
69.
– Move the seat cushion into the initial position.
WARNING
Ensure that the seat belts are not damaged when operating the seat
backrests. Under no circumstances must the rear seat belts be jammed by
the folded back seat backrests.
The belts and the belt locks must be in their original position after folding
back the seat cushions and the seat backrests - they must be ready to use.
Pay attention that the seat backrest is correctly interlocked. It is only then
that the three-point seat belt can reliably fulfil its function.
The seat backrests must be securely interlocked in position so that no
objects in the luggage compartment can slide into the passenger compart-
ment if there is sudden braking - risk of injury!
If the housing of the net partition* is installed, first of all fold th left seat
backrest forward and then the right double seat backrest.
Inserting head restraints in the seat cushions
– The rear head restraints can be inserted into the relevant holes of the
A
is not visible
A
Removing the seat cushion
The luggage compartment can be increased in size by removing the rear
seat.
Removing
– Fold the seat cushion forwards completely.
– Press the wire clamps in the direction of the arrow
Installing
– Press the wire clamps in the direction of the arrow and place it in its
– Fold the seat cushion back into its original position.
Fig. 70 Rear seats: Inserting
head restraints in the seat
cushions
folded forward seat cushions.
remove the seat cushion from its holder.
holder.
Fig. 71 Removing seat cush-
ions
⇒ fig. 71
and