Table of Contents
Advertisement
44
Lights and Visibility
− This mist has no influence on the life of the lighting system.
Fog lights*
Switching on the fog lights
– First of all turn the light switch into position
fig.
32.
– Pull the light switch out to the first notch
The rear fog light warning light
when the fog light is switched off.
Rear fog light
Switching on the rear fog light
– First of all turn the light switch into position
fig.
32.
– Pull the light switch out to the second notch
up at the same time.
If the vehicle is not fitted with fog lights*, the rear fog light is switched on by turning
the light switch to the position
A
. This switch does not have two positions, but only one position.
B
The rear fog light warning light
when the fog light is switched off.
Only the rear fog light of the trailer lights up automatically when you are towing a
trailer using a factory-fitted towing device which is fitted with the rear fog light .
Caution
The rear fog light should only be switched on if visibility is particularly poor
(conform with any varying legal provisions) to avoid dazzling vehicles behind your
vehicle.
⇒ page 43,
or
A
.
A
⇒ page 20 lights up in the instrument cluster
⇒ page 43,
or
A
. The fog lights* light
B
or
and is pulled out directly to the position
⇒ page 20 lights up in the instrument cluster
Instrument lighting*
You can adjust the brightness of the instrument lighting.
Switch on the light.
⇒ fig. 33
– Turn the control dial
ment lighting.
Headlamp range adjustment
Once the low beam is switched on you can then adapt the range of
the headlights to the load of the vehicle.
Fig. 33 Dash panel:
Instrument lighting
to the desired intensity of the instru-
Fig. 34 Dash panel:
Lights and Visibility
Hide quick links:
Advertisement
Table of Contents
