Related Manuals for Rini Carl Mk2
Summary of Contents for Rini Carl Mk2
- Page 1 User Manual Surgeon chair Carl Mk2/Mk3/Mk4 and Carl 4 Foot/Heel - Model R5 – Easy - Model R6 – Rilis - Model R7 – OneGrip - Model R7 – OneGrip electrical (Carl Mk3, Mk4) 2011-0177 v7...
-
Page 2: Table Of Contents
Surgeon chair Carl Mk2 and Carl 4 Foot/Heel Table of content Surgeon chair Carl ................3 Important – Before Use ..............4 Unpacking ..................4 Installation ..................4 Intended areas of use ..............5 Product classification and key data ..........6 Basic adjustments of the chair ............ -
Page 3: Surgeon Chair Carl
• Easy to clean with smooth surfaces and encapsulated details Carl Mk2 and Carl 4 Foot/Heel are the second generation of Rini's popular electrically adjustable surgeon chairs, Carl Mk3 and Mk4 are the third generation with electrically adjustable armrests where lots of user feedback and new technologies have been combined. -
Page 4: Important - Before Use
Surgeon chair Carl Mk2 and Carl 4 Foot/Heel Important – Before Use To ensure patient safety and the lifespan of the product, it is important to observe the following instructions before use. Please read this manual carefully and understand how to use the product before you start. -
Page 5: Intended Areas Of Use
When transporting the chair, it should be empty and in its lowest position. The chair is not designed for person transports. The Carl Mk2 chair with 3 wheels has an increased risk of tipping when leaning sideways in higher chair positions. -
Page 6: Product Classification And Key Data
The product's device class according to the US FDA is “Class 1” and exempt from premarket notification 510(k) requirements. The product is traceable via serial number and Rini has a "Post-market surveillance" system integrated within its quality system that is certified according to ISO13485 for medical devices. -
Page 7: Basic Adjustments Of The Chair
Chair height adjustment Brake for rear Carl 4 Foot wheels Carl Mk2 (upper picture) and Carl 4 Foot (lower picture) has intuitive controls and buttons to adjust the chair in yellow color to achieve an effective and ergonomic working environment. -
Page 8: Chassis, Wheels And Brake
4.2 Chair height adjustment The seat is raised and lowered electrically powered by a battery. Seat height for Carl Mk2, Mk3 is controlled by two buttons on the sides of the front wheel, Carl 4 Heel, Mk4 is controlled by pressing with heels on buttons between the front wheels and Carl 4 Foot by buttons on top of the front wheels. -
Page 9: Backrest Angle And Height Adjustment
Surgeon chair Carl Mk2 and Carl 4 Foot/Heel 4.4 Backrest angle and height adjustment The chair is equipped with a lever on the left side to adjust the backrest angle between -15º and +20º. Adjust the backrest to a comfortable position by lifting the lever which then locks in this position when it is dropped. -
Page 10: Model R5 - "Easy" Armrest
Surgeon chair Carl Mk2 and Carl 4 Foot/Heel 4.5 Model R5 - "Easy" armrest Rini´s "Easy" armrest have a cup shaped plates that can be set in all possible angles. 5. Knob for adjusting the armrest plate in 360° horizontal and angle 4. -
Page 11: Model R6 - "Rilis" Safety Armrest
Surgeon chair Carl Mk2 and Carl 4 Foot/Heel 4.6 Model R6 - "Rilis" safety armrest Rini´s patented safety armrest Rilis offers the most extensive adjustment possibilities to give an optimal ergonomic working position. 5. Lock wheel for adjusting the armrest longitudinal and lateral 4. -
Page 12: Model R7 - "Onegrip" Armrest
Surgeon chair Carl Mk2 and Carl 4 Foot/Heel 4.7 Model R7 - "OneGrip" armrest The OneGrip is suitable when an minor up/down adjustment range is needed, and it is required to be able to adjust the armrest during surgery while draped. Multiple armrest cushions are available. -
Page 13: Modell R7 - "Onegrip Electrical" Armrest (Carl Mk3, Mk4 )
Surgeon chair Carl Mk2 and Carl 4 Foot/Heel 4.8 Modell R7 - "OneGrip electrical" armrest (Carl Mk3, Mk4 ) The OneGrip electrical armrest is suitable when a larger adjustment range is needed, and the up/down height and angle settings can be made through push buttons when the armrest is sterile covered. -
Page 14: Battery Operation And Charging
At low battery levels it is possible to use the chair with the charger connected, but it is not recommended. A new battery module is ordered from Rini and is easy to replace. Only the dedicated charger for Carl chair may be used. -
Page 15: Disinfection, Cleaning And Repairs
Water Use damp cloth Repairs The product should only be repaired by Rini or a Rini authorised service centre. Product to be repaired under warranty must be sent to the Rini factory or an authorised Rini service centre. Unauthorized repairs and modifications may result in loss of function and void warranty. -
Page 16: Ce Declaration Of Conformance
Carl Mk2 43kg/95lb and Carl 4 45kg/99lb, Carl Mk3 and Mk4 57kg/ 126lb Length (chassis) Carl Mk2 and Carl Mk3 560mm and Carl 4, Mk4 530mm Width (chassis) Carl Mk2 and Carl Mk3 550mm and Carl 4, Mk4 520mm Medical classification... -
Page 17: Disposal And Recycling
Surgeon chair Carl Mk2 and Carl 4 Foot/Heel Disposal and recycling The product is mainly made from environmentally recyclable materials such as steel, stainless steel, aluminum and plastics. Rini recommends that the materials be sorted and recycled in connection with the destruction of the product. - Page 18 Rini Ergoteknik AB Fågelsångsvägen 3B SE-186 42 Vallentuna Sweden Phone +46 8 59477170 Email info@rini.se www.rinicompany.com...
Need help?
Do you have a question about the Carl Mk2 and is the answer not in the manual?
Questions and answers