1. Manuals
  2. Brands
  3. pellenc Manuals
  4. Chainsaw
  5. Selion C21 HD
  6. Operating instructions manual

pellenc SELION C21 HD Operating Instructions Manual

Hide thumbs Also See for SELION C21 HD:
Table of Contents

Advertisement

Quick Links

Download this manual
ENG
.
Translated from original
operating instructions manual
CHAINSAW
SELION C21 HD
51_149277-E
Operating Instructions
03/2024
READ THE USER OPERATING GUIDE CAREFULLY BEFORE USE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SELION C21 HD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for pellenc SELION C21 HD

Summary of Contents for pellenc SELION C21 HD

  • Page 1 Translated from original operating instructions manual CHAINSAW SELION C21 HD 51_149277-E Operating Instructions 03/2024 READ THE USER OPERATING GUIDE CAREFULLY BEFORE USE...

  • Page 3: Table Of Contents

    CHAINSAW SELION C21 HD 51_149277-E TABLE OF CONTENTS 1. INTRODUCTION ........................6 2. SAFETY ........................... 7 2.1. INTENDED USES ..........................2.2. RESIDUAL RISKS ........................... 2.3. GENERAL SAFETY INSTRUCTIONS FOR THE TOOL ..............2.3.1. WORK AREA SAFETY ........................2.3.2. ELECTRICAL SAFETY ........................
  • Page 4 4.6.2. FIRST FORCED LUBRICATION CYCLE ................... 4.7. RUNNING-IN (FIRST USE) ......................4.8. FITTING THE BATTERY ON THE HARNESS ................4.9. CONNECTING A BATTERY PELLENC TO THE TOOL ............... 4.9.1. ULIB 250 BATTERIES ........................4.9.2. ULIB 750 / ALPHA 260 / ALPHA 520 BATTERIES ................
  • Page 5 CHAINSAW SELION C21 HD 51_149277-E 7. INCIDENTS AND TROUBLESHOOTING ................44 8. STORAGE AND TRANSPORT .................... 44 8.1. STORAGE ............................8.2. PROLONGED STORAGE ......................8.3. TRANSPORT ..........................9. ACCESSORIES AND CONSUMABLES ................45 9.1. INCLUDED ACCESSORIES ......................9.2. OPTIONAL ACCESSORIES ......................

  • Page 6: Introduction

    Refer to 2.6. Safety signs, page 11 for the location diagram of the safety stickers affixed to the tool. No part of this manual may be reproduced without the written permission of the company PELLENC. The illustrations provided in this manual are for information purposes only and are in no way contractual. The company PELLENC reserves the right to make any modifications or improvements it deems necessary to its products without informing customers already in possession of a similar model.

  • Page 7: Safety

    CHAINSAW SELION C21 HD 51_149277-E 2. SAFETY 2.1. INTENDED USES • The ChainsawSelion C21 HD is intended for cutting only wood and branches up to a diameter corresponding to the length of the chainsaw guide bar. • The ChainsawSelion C21 HD is not intended for ground-based use.

  • Page 8: Work Area Safety

    CHAINSAW SELION C21 HD 51_149277-E 2.3.1. WORK AREA SAFETY Keep the work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in an explosive atmosphere, for example in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes Keep children and bystanders away while operating the power tool.

  • Page 9: Battery Tool Use And Care

    CHAINSAW SELION C21 HD 51_149277-E Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

  • Page 10: Causes And Operator Prevention Of Kickback

    CHAINSAW SELION C21 HD 51_149277-E Wear eye protection. Further protective equipment for hearing, head, hands, legs and feet is recommended. Adequate protective equipment will reduce personal injury from flying debris or accidental contact with the saw chain. Do not operate a chain saw on a ladder, from a rooftop, or any unstable support. Operation of a chain saw in this manner could result in serious personal injury.

  • Page 11: Safety Measures Related To The Use Of The Battery And The Charger

    CHAINSAW SELION C21 HD 51_149277-E 2.5. SAFETY MEASURES RELATED TO THE USE OF THE BATTERY AND THE CHARGER "PELLENC" Note Please refer to the battery operating instructions manual. Warning Read all safety warnings and all instructions. Retain all the safety measures and instructions for later reading.

  • Page 12: Personal Protective Equipment

    • Hold the left arm straight for better control. • Hold the chainsaw at your side, and not in front of you. • Use genuine chains and guides PELLENC • Keep the chain, the guide and the sprocket in good working condition.

  • Page 13: Working With Tree Service Hand-Held Chainsaws Using A Rope And Harness

    CHAINSAW SELION C21 HD 51_149277-E 2.9. WORKING WITH TREE SERVICE HAND-HELD CHAINSAWS USING A ROPE AND HARNESS 2.9.1. OVERVIEW This annex sets out working practices aimed at reducing the risk of injury from tree service chain-saws when working at height from a rope and harness. While it may form the basis of guidance and training literature, it should not be regarded as a substitute for formal training.

  • Page 14: Use Of The Chainsaw In The Tree

    CHAINSAW SELION C21 HD 51_149277-E 2.9.4. USE OF THE CHAINSAW IN THE TREE An analysis of accidents with these saws during tree service operations shows the primary cause as being inappropriate one-handed use of the saw. In the vast majority of accidents, operators fail to adopt a secure work position that allows them to hold both handles of the saw.

  • Page 15: Use Of The Chainsaw One-Handed

    CHAINSAW SELION C21 HD 51_149277-E 2.9.6. USE OF THE CHAINSAW ONE-HANDED Operators should not use chainsaws for one-handed tree pruning when they are in an unstable working position, and should prefer hand saws when cutting small-diameter wood from the end of branches.

  • Page 16: Description And Technical Features

    CHAINSAW SELION C21 HD 51_149277-E 3. DESCRIPTION AND TECHNICAL FEATURES 3.1. TOOL DESCRIPTION Rear handle Quick chain guide tightening lever Safety trigger 10. Chain protective casing Operating trigger 11. Power on light Hand protection 12. Tool power supply cord Carving chain guide 13.

  • Page 17: Technical Features

    CHAINSAW SELION C21 HD 51_149277-E 3.2. TECHNICAL FEATURES 3.2.1. GENERAL CHARACTERISTICS Selion C21 HD Battery life Depending on the use and type of battery Nominal voltage 43.2 V Chain oil reservoir capacity 25 cl Useful cutting length / chain guide See the table 3.2.2.

  • Page 18: Noise Levels

    • 1 user guide, • 1 warranty card. 4.2. USEFUL TIPS FOR COMMISSIONING Caution Always disconnect the tool battery before starting tool maintenance. • Use products recommended by PELLENC. • Contact an authorised distributor PELLENC in the event of a problem.

  • Page 19: Remove / Fit The Chain Guide Protector

    CHAINSAW SELION C21 HD 51_149277-E 4.3. REMOVE / FIT THE CHAIN GUIDE PROTECTOR Removing Fitting • Remove the chain guide protector by sliding it Position the chain guide guard. forward. Slide the chain guard protector backwards. 4.4. ASSEMBLY OF THE CHAIN AND CHAIN GUIDE (1ST USE) Lift the quick chain guide tightening lever (1) from its holding magnet (2).
  • Page 20 CHAINSAW SELION C21 HD 51_149277-E Remove the yellow foam plug blocking the oil outlet. Ensure that the chain tensioner is in the slack chain position. If necessary, push the retaining plate backwards using the chain guide or the quick chain guide tightening lever to loosen the chain tensioning system.

  • Page 21: Automatic Chain Tensioning (First Use)

    CHAINSAW SELION C21 HD 51_149277-E 10. Position the cover (5) by inserting the aligners into the notches. 11. Position the quick chain guide tightening lever (6). 12. Tighten the quick chain guide tightening lever (6). Note During this operation, the automatic chain tensioning mechanism must be triggered 13.

  • Page 22: Chain Lubrication (First Use)

    Check the oil level regularly while using the tool and top up if necessary. Note PELLENC recommends the use of a biodegradable chain oil conforming to the RAL-UZ-48 standard (ref. 116688, otherwise any oil that complies with the RAL-UZ-48 standard). Consumables sold separately.

  • Page 23: First Forced Lubrication Cycle

    CHAINSAW SELION C21 HD 51_149277-E 4.6.2. FIRST FORCED LUBRICATION CYCLE Warning Carry out a forced lubrication at the beginning of each season to check the lubrication function of the chain. Carry out forced lubrication if necessary as soon as the mechanism lacks lubrication.

  • Page 24: Connecting A Battery Pellenc To The Tool

    CHAINSAW SELION C21 HD 51_149277-E 4.9. CONNECTING A BATTERY PELLENC TO THE TOOL Important Always check the remaining battery-life before use. If necessary, recharge the battery using the charger. To prolong the life of the connectors, they should be protected when disconnected. Avoid leaving the connectors in contact with abrasive or dirty surfaces, or subjecting them to major impacts (falls).

  • Page 25: Disconnecting A Battery Pellenc From The Tool

    To prolong the life of the connectors, they should be protected when disconnected. It is therefore necessary to avoid having them in contact with abrasive or dirty surfaces, or subjecting them to significant impacts (falls). For more information on batteries PELLENC, refer to the battery operating instructions. 4.10.1. ULIB 250 BATTERY Make sure the battery is switched off, see 5.2.

  • Page 26: Ulib 750 / Alpha 260 / Alpha 520 Batteries

    CHAINSAW SELION C21 HD 51_149277-E 4.10.2. ULIB 750 / ALPHA 260 / ALPHA 520 BATTERIES Make sure the battery is switched off, see 5.2. Switching the battery on and off, page 26. Disconnect the tool power cord (1) from the quick connector power cord (2).

  • Page 27: Ulib 750 Battery

    CHAINSAW SELION C21 HD 51_149277-E 5.2.2. ULIB 750 BATTERY • Press one of the 2 On/Off battery buttons. 5.2.3. ALPHA 260 / ALPHA 520 BATTERIES • Press the battery On / Off button. 5.3. HOW TO HOLD AND USE THE TOOL...

  • Page 28: Start-Up

    CHAINSAW SELION C21 HD 51_149277-E 5.4. START-UP Caution Do not cut anything other than wood. Always start the motor before bringing the chainsaw into contact with the wood. Warning Before using for the first time, the chain guide and chain must be run in, see 4.7. Running- in (First use), page 23.

  • Page 29: Maintenance

    • All maintenance operations must be carried out with the battery switched off and the tool power cord disconnected from the battery, unless otherwise specified in the procedure. • Use products recommended by PELLENC. • Contact an authorised distributor PELLENC in the event of a problem. Prior to use During use...

  • Page 30: Checks

    CHAINSAW SELION C21 HD 51_149277-E Prior to use During use After use Every week Cleaning the chain guide, see 6.4.2. Cleaning the chain guide, page 42. Cleaning the oil tank, see 6.4.3. Cleaning the oil reservoir tank, page 42. Forced lubrication of the chain, see 6.5.1. Forced chain lubrication, page 43.

  • Page 31: Checking The Safety Throttle

    CHAINSAW SELION C21 HD 51_149277-E 6.2.2. CHECKING THE SAFETY THROTTLE Visually check the condition of the safety throttle. Ensure that nothing physical (e.g. tape, collar, etc.) prevents or interferes with the operation of the safety throttle. Ensure that the safety throttle is working properly by depressing it.

  • Page 32: Checking The Left Hand Protection

    CHAINSAW SELION C21 HD 51_149277-E 6.2.5. CHECKING THE LEFT HAND PROTECTION Visually check the condition of the left hand protective guard. Ensure that the left hand guard is securely attached by pulling it upwards. 6.2.6. CHECKING THE TOOL POWER CORD Check the condition of the power cord on the tool side and the battery side.

  • Page 33: Checking The Chain Brake

    CHAINSAW SELION C21 HD 51_149277-E 6.2.8. CHECKING THE CHAIN BRAKE Caution Never operate the chainsaw if the safety device is not operating. Run the tool at no contact. Perform rapid movements up and down to trigger the anti-kickback safety mechanism.

  • Page 34: Checking The Sharpness Of The Chain

    CHAINSAW SELION C21 HD 51_149277-E Checking the tension of the chain Important The chain tension is checked by pulling the chain in the middle of the guide: • 2 links maximum must be flush with the guide. • 1 link must be completely detached from the chain guide.
  • Page 35 CHAINSAW SELION C21 HD 51_149277-E Sharpen the gouges on one side of the chain by pushing the file from the inside to the outside of the gouge. Only file by pushing. Important For Precision chains: Round files (ref. 68521 and ref. 68611) are incompatible.

  • Page 36: Checking And Adjusting The Depth Limiters

    CHAINSAW SELION C21 HD 51_149277-E 6.2.12. CHECKING AND ADJUSTING THE DEPTH LIMITERS Check the depth limiters every 2 or 3 sharpening operations. Use a depth gage corresponding to the type of chain to be sharpened. Place the depth gage on the cutter.

  • Page 37: Replacement

    6.3. REPLACEMENT 6.3.1. REPLACING THE CHAIN AND THE CHAIN GUIDE Caution Never use a chain or guide other than those specified by PELLENC, as this may result in personal injury. Always wear leather gloves when handling the chain. Warning The running in of the guide and chain must be carried out each time one or the other is changed, see 4.7.
  • Page 38 CHAINSAW SELION C21 HD 51_149277-E Remove the quick chain guide tightening lever (1) and the cover (3). Loosen the chain (4). To slacken the chain: • Pull the chain (4) on both sides of the chain guide (5) until you hear it click.
  • Page 39 CHAINSAW SELION C21 HD 51_149277-E Position the chain guide (1). Slide the chain guide (1) backwards into the hooks on the retaining plate (2). Position the chain (3) around the sprocket (4) and chain guide (1), observing the cutting direction.

  • Page 40: Visual Check And Replacement Of The Sprocket

    CHAINSAW SELION C21 HD 51_149277-E 10. Grease the sprocket on the nose of the chain guide, see 6.5.2. Greasing the chain guide nose, page 43. 11. Run-in the chain guide and chain by running the tool without contact for 1-2 minutes.

  • Page 41: Cleaning

    Check the oil level regularly while using the tool and top up if necessary. Note PELLENC recommends the use of a biodegradable chain oil conforming to the RAL-UZ-48 standard (ref. 116688, otherwise any oil that complies with the RAL-UZ-48 standard). Consumables sold separately. 6.4. CLEANING 6.4.1.

  • Page 42: Cleaning The Chain Guide

    Switch off the battery, see 5.2. Switching the battery on and off, page 26. Disconnect the battery from the tool, see 4.10. Disconnecting a battery PELLENC from the tool, page 25. Remove the chain guide and the chain, see 6.3.1.

  • Page 43: Greasing

    CHAINSAW SELION C21 HD 51_149277-E 6.5. GREASING 6.5.1. FORCED CHAIN LUBRICATION Warning • Carry out a forced lubrication at the beginning of each season to check the lubrication function of the chain. • Carry out forced lubrication if necessary as soon as the mechanism lacks lubrication, see 6.2.9.

  • Page 44: Incidents And Troubleshooting

    Switch off the battery, see 5.2. Switching the battery on and off, page 26. Disconnect the battery from the tool, see 4.10. Disconnecting a battery PELLENC from the tool, page 25. Store the battery (refer to the battery operating instructions).

  • Page 45: Transport

    Switch off the battery, see 5.2. Switching the battery on and off, page 26. Disconnect the battery from the tool, see 4.10. Disconnecting a battery PELLENC from the tool, page 25. Fit the chain guide guard, see 4.3. Remove / Fit the chain guide protector, page 19.

  • Page 46: Consumables

    CHAINSAW SELION C21 HD 51_149277-E Name reference Comfort harness 57183 Lightweight harness 57257 Battery PELLENC ULIB 750 57191 Extension cord 57238 Name reference Alpha harness 57194 Battery PELLENC ALPHA 260 57192 Battery PELLENC ALPHA 520 57193 Extension cord 57248 9.3. CONSUMABLES...

  • Page 47: Warranties

    The warranty forms an inseparable whole with the product sold by PELLENC. 10.1.2.1.2. SPARE PARTS The commercial warranty also covers original spare parts PELLENC, excluding labour and to the exclusion of certain spare parts of each product provided upon delivery.

  • Page 48: Paid After-Sales Service

    Products PELLENC connected to a battery are covered by the commercial warranty from the date of delivery to the user customer for a period of two (2) years PELLENC, and for a period of one (1) year in respect of other products PELLENC.
  • Page 49 The paid after-sales service also covers original spare parts PELLENC, excluding labour and outside the legal or commercial warranty period. In case of replacement of original spare parts PELLENC in the context of the after-sales service, said latter are covered by a commercial warranty of one year as of the installation date.

  • Page 50: Compliance Statements

    CHAINSAW SELION C21 HD 51_149277-E 11. COMPLIANCE STATEMENTS 11.1. EC DECLARATION OF CONFORMITY : SELION C MANUFACTURER / PERSON AUTHORISED TO COMPILE PELLENC THE TECHNICAL FILE ADDRESS Quartier Notre-Dame - 84120 Pertuis (France) We hereby declare that the machine designated below:...

  • Page 51: Declaration Of Conformity

    CHAINSAW SELION C21 HD 51_149277-E 11.2. UK DECLARATION OF CONFORMITY : SELION C21 HD MANUFACTURER / ENTITY AUTHORIZED TO COMPILE PELLENC THE TECHNICAL FILE ADDRESS Quartier Notre-Dame - 84120 Pertuis (France) We hereby declare that the machine referred to below as:...
  • Page 52 PELLENC Quartier Notre Dame - 84120 Pertuis (France)

Table of Contents