POSIFLEX HC-5321 User Manual
POSIFLEX HC-5321 User Manual

POSIFLEX HC-5321 User Manual

Fanless touch pos terminal

Advertisement

HC-5321/E
Fanless Touch POS Terminal
User Manual
SOME IMPORTANT NOTES
FCC NOTES
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
CE CLASS A WARNING
This equipment is compliant with Class A of CISPR 32. In a residential environment
this equipment may cause radio interference.
AVERTISSEMENT CE CLASSE A
Cet équipement est conforme à la classe A de CISPR 32. Dans un environnement
résidentiel, cet équipement peut provoquer des interférences radio.
WARRANTY LIMITS
Warranty will terminate automatically when the machine is opened by any person other
than the authorized technicians. The user should consult his/her dealer for the problem
happening. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.
LIMITES DE GARANTIE
La garantie prend fin automatiquement lorsque la machine est ouverte par une personne
autre que les techniciens autorisés. L'utilisateur doit consulter son revendeur pour le
problème qui se produit. La garantie s'annule si l'utilisateur ne suit pas les instructions
d'application de cette marchandise. Le fabricant n'est en aucun cas responsable de tout
dommage ou danger causé par une mauvaise application.
HC-5321/E Ver. A0
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HC-5321 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for POSIFLEX HC-5321

  • Page 1 L'utilisateur doit consulter son revendeur pour le problème qui se produit. La garantie s'annule si l'utilisateur ne suit pas les instructions d'application de cette marchandise. Le fabricant n'est en aucun cas responsable de tout dommage ou danger causé par une mauvaise application. HC-5321/E Ver. A0...
  • Page 2 警告 為避免電磁干擾,本產品不應安裝或使用於住宅環境。 SAFETY INSTRUCTIONS This equipment is not suitable for use in locations where children are likely to be present. CONSIGNES DE SÉ CURITÉ Cet équipement ne convient pas à une utilisation dans des lieux pouvant accueillir des enfants. WARNING Power cord shall be connected to a socket-outlet with earthing connection ATTENTION Le cordon d'alimentation doit être connecté...
  • Page 3: Revision History

    Revision History Date Version Description 2025/04/24 For Preliminary Release Package Contents  HC-5321/E POS Terminal (x 1)  Gen10 Base Stand (x 1) (Optional)  Power Adapter (x 1)  Power cord (x 1)
  • Page 4 Views of HC-5321/E Front View Optional Camera Window 21.5” P-CAP Touch & LCD Panel LED Indicator Power Button Volume Adjustment Button “+” Volume Adjustment Button “-”...
  • Page 5 Rear View VESA 100x100 Mounting Holes Side Side Attachment Attachment Cover Cover Speaker Speaker Cable Cover Gen10 Base Stand (Optional) Neck Cover Cable Exit...
  • Page 6: Connecting I/O Cables

    Views of I/O Interface of HC-5321 Audio Line- out/Mic-in Port USB 3.0 Ports RJ50 USB Type-C Ports HDMI Ports COM Port USB2.0 Ports CR Port DB-9 COM Port USB 3.0 Ports LAN Ports 24V DC-IN Power Jack Note1: The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks of HDMI Licensing Administrator, Inc.
  • Page 7 Note: Please use the type-C cable certified/provided by Posiflex. Please DO NOT use the cables from other unknown sources. CAUTION: On doing insertion or extraction of a cable connector, please always hold the connector head itself instead of pulling the cable wire. Doing this could damage the cables and ports, which is considered as an artificial damage and is not covered by the warranty.
  • Page 8 Remove the IO cover. Connect the relative cables to the POS terminal, and then close the IO cover. Pass the cable to the cable exit of the base stand. There is an upward arrow pattern on the inside of the neck cover. When closing the neck cover, make sure the arrow pattern is on the upper side.
  • Page 9 When closing the neck cover, make sure the arrow pattern is on the upper side. And remember to pull the cables out from the cable exit under the base stand. Turn the bottom side of base stand face to you. Remove the power adapter bracket with four screws.
  • Page 10 10. Fix the bracket with power adapter to the base stand with the original four screws. Powering ON/OFF the HC Series Power Button After connecting the power cable to the power jack of the terminal, press the power button to power on the terminal. To power it off, press the power button again.
  • Page 11: Specifications

    For HC series with preloaded operating systems, please be advised to contact your service center for further assistance with system recovery. You are NOT encouraged to recover your system without the help of the system integrators. Specifications HC-5321 HC-5321E Intel Raptor Lake-U Processor Memory 2 x DDR5 SO-DIMM, max.
  • Page 12: Outline Dimension

    HC-5321 HC-5321E Net Weight 4.96 kg (without Gen10 base stand) Operating:0°C 〜 40°C, 20%RH - 90%RH Environmental Storage:-20°C 〜 70°C, 10%RH - 90%RH Requirements Regulation Rules FCC/CE ※ The product information and specifications are subject to change without prior notice.
  • Page 13 Manufacturer: Posiflex Technology Inc. 4F-8F, No. 23, Datong St., Tucheng Dist., New Taipei City 236044, Taiwan Tel : +886 2 2268 5577 製造商資訊 振樺電子股份有限公司 新北市土城區大同街 23 號 4 樓~8 樓 電話:02-2268-5577...

This manual is also suitable for:

Hc-5321e

Table of Contents