Vertiv VPX100 Quick Installation Manual

Quick Installation Guide
CAT. 5 USB KVM EXTENDER
VPX100 / VPX300
EN v1.0, Oct. 2024
VPX100 (100 meter model)
VPX300 (300 meter model)
FCC / CE STATEMENT
FCC Statement:
This equipment has been tested and found to comply with the
regulations for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with this Quick Installation Guide, may cause harmful
interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case,
the user will be required to correct the interference at his/her own
expense.
CE Statement:
This is a Class B product in a domestic environment, this product may
cause radio interference, in which case the user may be required to
take adequate measures.
*This document is subject to possible change without prior notice.
Copyright © 2024 All Rights Reserved
P/N: 30-190-VPX100XX-01-VT-10
1. INTRODUCTION
The CAT.5 USB KVM Extender VPX100/VPX300 extends your keyboard,
mouse, and monitor from your computer up to 100m/300m away
over a single CAT.5 UTP cable, providing excellent video quality.
The CAT.5 USB KVM Extender consists of two distinct units: the
Receiver (RX) unit and the Transmitter (TX) unit. The TX and RX
units are located at opposite ends of a CAT.5 UTP cable. A computer
is connected to the TX unit at the local site, while access to the
computer is extended across 100m/300m to the console connected
to the RX unit.
This allows the user to remotely access the computer via the RX unit's
console. The RX unit also features a built-in KVM switching function,
enabling the user to switch between two computers connected to the
TX unit and the RX unit, respectively. This setup is particularly useful
in environments like exhibition rooms, work floors, security rooms,
locked server rooms, or other mission-critical scenarios.
This CAT.5 USB KVM extender set allows you to position your server at
a distance from the user for security or spatial reasons. Additionally,
it enables the user to manage and control two computers located
at both the local and remote sites from the RX unit's console. The
extender also supports firmware upgrades to enhance compatibility
and functionality when necessary.
2. PACKAGE CONTENTS
Please check whether you have all the following items within the
packaging box:
3. CONNECTION DIAGRAM
The diagram illustrated below is an example, the actual application
may vary. All illustrated computer, accessories and monitors are not
included in the package, it is for reference only.
4. FRONT&REAR PANELS
VPX100
1