Arjo Symbliss Quick Reference Manual

QUICK REFERENCE GUIDE – USE
Symbliss
Bath
Preparations
1
Risk of
tipping
Always look out for obstacles when raising or lowering the bathtub.
Lower the bathtub to the lowest position.
4
Fill the bathtub.
Bathe patient using a bath chair
7
Transfer the patient to the bathtub.
10
Lower the patient into the bath without any part of the body rubbing
against the bathtub. Monitor the water level.
Bathe patient in a sling
7
Transfer the patient to the bathtub.
10
Lower the patient into the bath without any part of the body rubbing
against the bathtub. Monitor the water level.
5
Feel the water on your bare skin to make
sure the water temperature is comfortable.
Risk of scalding
8
Raise the bathtub and let the patient feel the water with their feet.
Adjust the temperature if needed.
8
Raise the bathtub and let the patient feel the water with their feet.
Adjust the temperature if needed.
08.SYB.00_2EN • 2024-11 • Page 1/3
2
Close the drain.
11
12
Adjust the footrest, Bathe the patient. To use Hydromassage, Hydrosound
if used. or Music and Lighting system, see page 3.
11
Risk of
drowning
Keep the sling attached to the lift throughout
the procedure.
3
If Hydromassage or Hydrosound is to be used,
prepare according to page 3.
6
Adjust the temperature if needed.
9
Adjust the bathtub to an ergonomic
height.
Continue with step 15 on page 2
9
Raise the bathtub to an ergonomic height.
12
Adjust the footrest, if used.
Instructions continue on next page