Table of Contents
Advertisement
13.Appendix F
13.6. AIT Cassette Secondary ID in MIC
Secondary ID
ASCII
HEX value
1
31h
2
32h
3
33h
4
34h
5
35h
V
56h
W
57h
X
58h
Y
59h
Z
5Ah
13.7. Unreadable MIC
The Sony SDX-550V applies smart retry sequences when the drive has problems reading MIC. Each data chunk in
MIC has a checksum. Additionally, the drive always employs a verify sequence after writing data to MIC. The
contents of MIC are as follows.
(1) Manufacturer Information
(2) System Log Information (statistical information for tape errors, etc.)
(3) Map (for Super Fast Search)
(4) User Partition Note/ User Volume Note
If the contact type of MIC becomes unreadable under DDS Emulation Mode, Sony SDX-550V treats the AIT-1 and
AIT-2 media as a non-MIC cassette with no check condition status; however, the MIC availability can be checked by
using Mode Sense Page 31h. The System Log information is saved to tape automatically. In other hand, under AIT
Native Mode, SDX-550V generate the check condition code.
A cassette with damaged MIC can be reformatted with the Mode Select Page 11h. If MIC becomes readable during
re-initialization, the cassette will be formatted as a MIC media.
13.8. Example SCSI Command Sequence for MIC
13.8.1. How to create User Notes in AIT-2 MIC
The phrase "User Note" includes both User Volume Note and User Partition Note. User Notes are all variable in size
from 1 byte up to the available user memory size. SDX-550V generates error (illegal parameter list length), if the
User Volume Note Data Size or the User Partition Notes are ZERO. SDX-550V will allocate memory for User Notes
by the unit of 16 bytes that include overhead for the memory management. For this reason, please check free byte
count of the MIC before creating an User Note.
13-2
Definition
15 m AIT cartridge that serial number is smaller equal than a number of 6 figures.
70 m middle length of AIT cartridge that serial number is smaller equal than a number of 6
figures.
170 m standard length of AIT cartridge that serial number is smaller equal than a number of
6 figures.
230m long length of AIT cartridge that serial number is smaller equal than a number of 6
figures.
185m long length of AIT cartridge that serial number is smaller equal than a number of 6
figures
185m AIT cassette that serial number is greater equal than a number of 7 figures.
230m AIT cassette that serial number is greater equal than a number of 7 figures.
170m AIT cartridge that serial number is greater equal than a number of 7 figures.
70m middle length of AIT cartridge that serial number is greater equal than a number of 7
figures.
15m short length of AIT cartridge that serial number is greater equal than a number of 7
figures.
SONY AIT-2 Turbo drive SDX-550V series Ver.1.0
Advertisement
Table of Contents
