Download Print this page

Alpha WSER-B 10/14 Manual

Advertisement

Quick Links

1.
TECHNI
CAL
SPECIFICATIONS
Power:
Rechargeable
Lithium battery DC12V
Protection Class: IP44
Received frequency: 433.92MHz
2. WIRE CONNECTION
Fully charge the motor before use.
Time to fully charge depending on charger used:
1amp=28 hours
1.5amp=21 hours
Motor should be fully charged with a charger before a solar panel
is connected.
3. WAKE MOTOR UP AND ASSIGNING REMOTE
Motor is in sleep mode/storage mode. Wake motor up by: (a) Plug in 5V charger for a few seconds till motor vibrates. (b) Hold
motor button down for 3 seconds till motor vibrates.
Assign remote: Only once above steps have been completed. Tap (do not hold) red button on motor, motor jiggles, assign with
remote.
x1
Press motor head button for
1sec till motor vibrates.
4. CHANGE DIRECTION
x1
x1
Press UP and DOWN buttons
simultaneously.
5. SET TOP LIMIT
x1
x1
Press UP and DOWN buttons
simultaneously.
6. SET BOTTOM LIMIT
x1
x1
Press UP and DOWN buttons
simultaneously.
7. DELETE TOP LIMIT
x1
x1
Press UP and DOWN buttons
simultaneously.
8. DELETE BOTTOM LIMIT
x1
x1
Press UP and DOWN buttons
simultaneously.
WSER
D50
-B 10/14 & 20/12 MOTOR GUIDE p
ALPHA SUPPORT PHONE (02) 4355 4775
2amp=18 hours
x1
Press UP and DOWN
buttons simultaneously.
x6
Press remote's STOP button
6 times within 10sec.
x2
Press remote's STOP button
twice within 10sec.
x2
Press remote's STOP button
twice within 10sec.
x4
Press remote's STOP button
4 times within 10sec.
x4
Press remote's STOP button
4 times within 10sec.
Working Temperature: -10°C to 65°C
Motor can be assigned with up to 15 compatible remotes
Motor has overload, low battery/charging protection
UP
STOP
DOWN
ALDC 5V Charger
x1
x1
Press STOP button once
within 10sec, motor will vibrate.
x1
x1
Press remote's DOWN button once
within 10sec, motor will vibrate.
x1
x1
Press remote's UP button once
within 10sec, motor will vibrate.
x1
x1
Press remote's DOWN button once
within 10sec, motor will vibrate.
x1
x1
Press remote's UP button once
within 10sec, motor will vibrate.
x1
x1
Press remote's DOWN button once
within 10sec, motor will vibrate.
1
TYB004-U Solar Panel
You can now control the
motor with the remote.
The motor's running direction
is changed.
The up limit is set.
The down limit is set.
The up limit is deleted.
The down limit is deleted.

Advertisement

loading
Need help?

Need help?

Do you have a question about the WSER-B 10/14 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Alpha WSER-B 10/14

  • Page 1 WSER -B 10/14 & 20/12 MOTOR GUIDE p ALPHA SUPPORT PHONE (02) 4355 4775 TECHNI SPECIFICATIONS Power: Rechargeable Lithium battery DC12V Working Temperature: -10°C to 65°C Protection Class: IP44 Motor can be assigned with up to 15 compatible remotes Received frequency: 433.92MHz Motor has overload, low battery/charging protection 2.
  • Page 2 WSER -B 10/14 & 20/12 MOTOR GUIDE p ALPHA SUPPORT PHONE (02) 4355 4775 9. STEP BY STEP FUNCTION If motor is in “Step by Step” function, press and hold UP or DOWN button for the motor to run continuously.
  • Page 3 -B 10/14 & 20/12 MOTOR GUIDE p3 ALPHA SUPPORT PHONE (02) 4355 4775 At Alpha Tubular Motors, your safety and the effective operation of our tubular motors with lithium-ion batteries are our top priorities. We kindly ask you to follow these important safety guidelines:...

This manual is also suitable for:

Wser-b 20/12