1.
TECHNI
CAL
SPECIFICATIONS
Power: Lithium battery DC12V
Protection Class: IP44
Received frequency: 433.92MHz
2. WIRE CONNECTION
UP
STOP
DOWN
LIGHT
Channel Switch
Button
3. CODE LEARNING
Way A
Power on learning
DC12 V
0
Power
1
Power on, the motor
will vibrate.
Note:
a) Way A is only for the tubular motor which didn't learn any
b) If the motor has already learned
motor three times continuously, and make sure the motor vibrate each time, then Way A is valid for this motor.
Way B
Note:
Remote
A has learned motor's code, and
1
A
Press the UP and DOWN
buttons of
remote
A
simultaneously.
Way C
Press motor head's button for 1s
till the motor vibrates.
4. CODE DELETING
Way A
1
Press
remote
's UP and DOWN
buttons simultaneously.
Note: All the
remotes
will not control this motor, unless you cut off the power and do code learning again.
WSER
ALPHA SUPPORT PHONE (909) 307-2320
Note: After code learning, you can use the
1
Press
remote
's UP and DOWN
buttons simultaneously.
remote
's code, Way A is invalid for this motor, but you can cut the electricity and then power on the
remote
8
1
A
Press the STOP button of
remote
A eight times, the
motor will vibrate.
1
1
Press
remote
's UP and DOWN
buttons simultaneously.
6
Press
remote
's STOP
button six times.
D50
MOTOR GUIDE p
Code: Rolling code
One motor can be controlled by 15 units of
battery wand
capacity
battery discharging
remote
to control the motor to run up, down and stop.
1
Press
remote
's STOP button
once, the motor will vibrate.
remote
's code.
B is a new one.
1
B
Press the UP and DOWN
buttons of
remote
B simultaneously.
1
Press
remote
's STOP button
once, the motor will vibrate.
Press
remote
's UP button
once, the motor vibrates once.
remotes
solar panel
battery
charging
charging voltage
15-20
1
Code learning is successful,
you can control the motor by
the
remote
.
1
B
Press the STOP button of
once, the motor will vibrate again.
Now
remote
B can control the motor as well.
1
You can control the motor
by the
remote
.
1
All the
remote
that have already
learned the motor's code won't
control the motor any more.
1
at most
1
remote
B