HOMCOM 800-154V70 Manual page 9

EN
TROUBLESHOOTING
PROBLEM
"ADD WATER"indicator
is on.
"ICE FULL" indicator is
on.
lce cubes stick together.
lce making cycle is
normal but no ice
formed.
POSSIBLE CAUSE
Lack of Water.
Ice is full in the basket.
The ice making cycle is
too long.
Water temperature in
inner tank is too low.
Room temperature or
water temperature in inner
tank is too high.
Refrigerant in cooling
system leaks.
Pipe in the cooling system
is blocked.
9
SOLUTION
Stop the ice maker, fill
water, and press
"ON/OFF" button again to
restart the unit.
Remove ice from ice
basket. Continuous press
"ON/OFF" button 5
seconds, the unit could
make ice 10 cycles even
"lce" indicator is on.
Stop the ice maker, and
restart it when the ice
blocks melt. Select the
small size ice cube
selection.
Replace the water.
Temperature of water
recommended at 40℉-
90℉
The room temperature
should be 10-43℃(50-
105℉),water temperature
should be 8-32℃(40℉-
90℉).
Verify by a qualified
technician.
Verify by a qualified
technician.