Advertisement
Quick Links
Advertisement
Related Manuals for Eastwood 33861
Summary of Contents for Eastwood 33861
- Page 1 Item #33861 TAP AND DIE SET INSTRUCTIONS...
- Page 2 The EASTWOOD 60 PIECE TAP AND DIE SET offers both SAE and Metric Tap and Die thread sizes to handle most any thread cutting project. A selection of Tap and Die holders provide positive and secure control of Taps and Dies while performing thread cutting operations. The included SAE and Metric Thread Gauges allow accurate measuring of existing threads to be matched.
-
Page 3: Safety Information
DO NOT APPLY EXCESSIVE FORCE! • Taps may break inside of a drilled bore. If excessive force is required, reverse direction of cutting, remove chips and resume cutting. To order parts and supplies: 800.343.9353 >> eastwood.com... - Page 4 - Loosen the three thumbscrews on the back of the Die Holder, rotate the aperture to set the Guide Jaws to lightly contact the O.D. of the rod being threaded. - Re-tighten the three aperture thumb screws finger tight. Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com...
-
Page 5: Thread Cutting
• Typical thread cutting procedure is one revolution then back off 1/2 turn to release chips. • When the threading operation is complete, slowly, and steadily back off the Die. To order parts and supplies: 800.343.9353 >> eastwood.com... - Page 6 NOTES Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com...
- Page 7 NOTES To order parts and supplies: 800.343.9353 >> eastwood.com...
- Page 8 If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: tech@eastwood.com PDF version of this manual is available at eastwood.com The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA 800.343.9353 eastwood.com...
Need help?
Do you have a question about the 33861 and is the answer not in the manual?
Questions and answers