Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Eastwood 32559
Summary of Contents for Eastwood 32559
- Page 1 Item #32559 14 GAUGE METAL HAND PUNCH INSTRUCTIONS...
- Page 2 The EASTWOOD 14 GAUGE METAL HAND PUNCH is designed to rapidly produce repeatable, clean, accurate holes in mild steel up to 14 Gauge (5/64”) [2mm] thick making it perfect for creating rivet holes for custom fabrication work. A compound-leverage design greatly amplifies hand pressure providing greater accuracy, speed and convenience.
-
Page 3: Safety Information
• Thoroughly read and understand this manual before using. • Save for future reference. PINCH AND CRUSH HAZARD! • The Eastwood Metal Hand Punch presents a hand/finger pinch hazard and cause potentially serious injuries. Avoid pinching fingers and hands while handling and operating. - Page 4 • Rotate the Upper Handle upward and pull the Anchor Arm backward (FIG 2). • Slip the Male Punch Die upward through the lower bore of the Main Body Lower Jaw with FIG. 2 the “T” Head up (FIG 3). FIG. 3 Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com...
-
Page 5: Operation
• Slowly apply increasing pressure to the Punch by squeezing the Upper Handle and Punch Body Handles together (FIG 8). • Once the Die has punched through the metal, open the Jaws to release the slug. FIG. 8 To order parts and supplies: 800.343.9353 >> eastwood.com... -
Page 6: Maintenance
• After each use, clean tool of any debris and inspect punching dies for damage. • Apply a thin coat of machine oil on all Punching Die surfaces to prevent corrosion and maximize performance. • Lubricate all Metal Punch pivot points with a medium bodied machine oil. Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com... -
Page 7: Troubleshooting
Dies Will Not Metal work- Stop all action to avoid serious damage. Shear Metal piece too thick Do not exceed material limitations described or too hard in the “SPECIFICATIONS” section. To order parts and supplies: 800.343.9353 >> eastwood.com... -
Page 8: Additional Items
Shrinker/Stretcher Stand If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: tech@eastwood.com PDF version of this manual is available at eastwood.com The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA 800.343.9353 eastwood.com...