Installing Policy Manager Console; Download And Run The Installation Package; Select Components To Install; Complete Installation Of The Product - F-SECURE POLICY MANAGER 9.0 Administrator's Manual

Installing Policy Manager Console

This section contains instructions for installing Policy Manager Console.
Policy Manager Console can operate in two modes:
• Administrator mode - you can use Policy Manager Console to its full extent.
• Read-only mode - you can view Policy Manager Console information but cannot perform any administrative
tasks (this mode is useful, for example, for helpdesk personnel).
The same console installation can be used for both administrator and read-only connections. The following
sections explain how to run the Policy Manager Console setup from the installation package, and how to
select the install operation mode when the console is run for the first time. The setup is identical for both
modes, and it is always possible to add new administrator and read-only connections after the initial startup.

Download and run the installation package

The first stage in installing Policy Manager is to download and run the installation package.
To begin installing the product:
1. Download the installation package from www.f-secure.com/webclub.
You will find the file in the
2. Double-click the executable file to begin installation.
Setup begins.
3. Select the installation language from the drop-down menu and click
4. Read the license agreement information, then select

Select components to install

The next stage is to select the product components to install.
To continue installing the product:
1. Select the components to install (Policy Manager Console) and click
2. Choose the destination folder and then click Next.
It is recommended to use the default installation directory. If you want to install the product in a different
directory, you can click
3. Click Next to continue.
4. Specify the F-Secure Policy Manager Server
to continue.
Note: Depending on the installation method, this window is not always displayed.

Complete installation of the product

The next stage is to complete the installation of the product.
1. Review the changes that setup is about to make, then click
When completed, the setup shows whether all components were installed successfully.
2. Click Finish to complete the installation.
3. Restart your computer if you are prompted to do so.
Download section of the
Browse and select a new directory.
address and
F-Secure Policy Manager | Installing the product | 23
Policy Manager page.
Next to continue.
I accept this agreement
Next to continue.
Administration port
Start to start installing the selected components.
and click Next to continue.
number, then click Next