F-SECURE POLICY MANAGER 9.0 Administrator's Manual page 45

When installation is complete, Management Agent sends the result of the installation operation in an incremental
policy file to the server. Policy Manager Console discovers the new status information and shows the results.
Uninstallation uses these same delivery mechanisms. The results of the uninstallation will not be reported.
Using the installation editor
The installation editor must be used on those hosts that already have Management Agent installed.
To use the installation editor:
1. Open the Policy tab and select the root node (the
Alternatively, open the
The Installation editor
2. In the Installation editor, select the products to be installed on the currently selected host or policy domain.
The Installation editor
target policy domain or host:
Product name
Installed version
Version to install
Version being installed
Progress
• If a host is selected, the
In progress
Failed
Completed
(Empty field)
• If a domain is selected, the
<number> hosts left
failed
Completed
Install tab.
opens.
contains the following information about the products that are installed on your
Progress field displays one of the following messages:
Progress field displays one of the following:
- <number> installations
F-Secure Policy Manager | Using Policy Manager Console | 45
F-Secure sub-tree).
Name of the product, which is either installed on a
host or domain, or which can be installed with an
available installation package.
Version number of the product. If there are multiple
versions of the product installed, all version numbers
will be displayed. For hosts, this is always a single
version number.
Version numbers of the available installation
packages for the product.
The current version being installed on a host or
domain.
Progress of the installation task. The
displays information that is different for hosts and
for domains.
The installation operation has been started (added
to policy data), but the host has not yet reported
the operation's success or failure.
The installation or uninstallation operation failed.
Click the button in the
status information.
The installation or uninstallation operation
succeeded. This message will disappear when the
Installation editor is closed.
No operations are active. The
field displays the currently installed product version.
Number of hosts left and number of failed
installations. Click the button in the
for detailed status information.
The installation or uninstallation operation
succeeded on all hosts.
Progress field
Progress field for detailed
Installed version
Progress field