Shared Preferences - F-SECURE POLICY MANAGER 9.0 Administrator's Manual

Tab Setting
Policy Files Policy file
optimizations
Policy file serial
number
Push Installation
installation timeout
Browsing
timeout
Maximum
concurrent
network
operations
Progress
indicator

Shared preferences

These apply to all connections defined in a particular installation of Policy Manager Console.
F-Secure Policy Manager | Using Policy Manager Console | 59
Meaning
Skipping the initial status loading option does not affect manual status
refreshment or periodic status polling. If necessary, you can disable the
automatic status polling. To do this:
1. Select Tools Preferences
2. Select the Communications
3. Select Disable all polling.
Indentation defines if separation characters will be added to the file
when it is being created, which would make it more human-readable. If
you choose to switch Indentation
added, and the files will be less human-readable, but still completely
correct and machine-readable. It is possible to select either space or
tab characters as separators. Tabs are recommended because the
resulting file is smaller than with space separators.
Include comments affects the size of the policy files produced by Policy
Manager Console. These comments are used to make the file more
understandable by the users if they want to read the values directly from
the file.
These settings are normally used only for debugging purposes, and
both indentation and comments could be disabled in normal production
use.
The serial file of generated base policy files. The serial number
increments automatically. Normally, there is no need to adjust it
manually. You only need to increase the value if hosts are not accepting
policy files because of serial numbers that are too low (the hosts report
this as errors). In this case, the serial number must be increased to be
larger than the serial number in the latest base policy file fetched by the
hosts.
The maximum time Policy Manager Console waits for the results of an
installation operation.
Important only if the Hide already managed hosts
This is the maximum time allowed to access the host registry.
You can adjust the number of network operations. The default is
recommended, but if you have a slow network connection that is causing
problems when you are push installing, decrease the number of
concurrent network connections accordingly.
You can choose to display the progress indicator to end users during
remote installation.
from the menu.
tab and click Polling period
off, no separator characters will be
option is in use.
options.