• Rese ing the Wi-Fi: Press and hold the mode bu on for seven seconds. When the Wi-Fi indicator blinks orange,
the Wi-Fi is reset successfully.
Note: Within 30 minutes a er the Wi-Fi is reset successfully, the Wi-Fi indicator will remain blue for three
minutes and then go out if the humidifier is connected to the network successfully. If the humidifier cannot
connect to the network within 30 minutes, the Wi-Fi function will be disabled.
• Dry running protection: When the water tank runs out of water, the humidifier will beep three times, and the
indicators will remain red for 30 seconds and go out. Then the humidifier will enter standby mode. A er adding
water, press the power bu on to turn the humidifier on.
• Water tank removal protection: When the water tank is removed, the humidifier will beep three times, and all
mode indicators will remain red. Then the humidifier will stop working. A er the water tank is reinstalled, the
indicators will go out and the humidifier will enter standby mode. Press the power bu on to turn the humidifier
on.
• Over-humidity protection: When operating at level 3, the humidifier will automatically switch to level 1 if it
detects that the ambient humidity exceeds 70% RH for 30 minutes. This function can prevent tables from being
wet by a large amount of moisture.
Note: This function is disabled by default and can be enabled in the app.
Connecting with the Mi Home/Xiaomi Home App
This product works with the Mi Home/Xiaomi Home app*. Use the Mi
Home/Xiaomi Home app to control your device, and to interact with other smart
home devices.
Scan the QR code to download and install the app. You will be directed to the
connection setup page if the app is installed already. Or search for "Mi
Home/Xiaomi Home" in the app store to download and install it. Open the Mi
Home/Xiaomi Home app, tap "+" on the upper right, and then follow the
instructions to add your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The
name of the app displayed on your device should be taken as the default.
Note: The version of the app might have been updated, please follow the
instructions based on the current app version.
7
Need help?
Do you have a question about the Smart Humidifier 2 and is the answer not in the manual?