Advertisement
Quick Links
Introduction
FrSky Tandem X20 series HD radio system provides the perfect solution for FPV flying and pilots preferring an
easier operation with fewer devices. The HD version of the X20 radio system includes an integrated FPV screen
supporting 720p 60FPS video quality, removing the need for a standalone FPV screen. When combining the HD
720p 60FPS video with near 0ms low latency digital video transmission technology, the X20 HD radio will provide
more enjoyment and confidence when FPV flying tours. The built-in video receiver module is compatible with all
HDZero video transceiver (VTX) products.
The X20 HD radio package includes a 5.8G antenna kit. The circularly polarized directional antennas ensure that
the radio receives optimum video transmission signals, even in complex RF environments. The HD version of the
X20 radio also provides an HDMI output which can be used to easily transfer the HD video to an external monitor
or device if required, this provides a great solution if you wish to use your existing FPV goggles which support
HDMI-in, removing the need for separate HDZero video receiver attached to your goggles.
Overview
Display Screen
Power Switch
SF
SE
SB
SA
Slider
Stick
SYS,
MDL,
MDL
DISP,
RTN
Speaker
Ventilation hole
Carrying Bar
Module
Bay
SWJ
SWI
Battery
Cover
Instruction Manual for FrSky TANDEM X20 HD (UpKit)
2.4G Internal Antenna
Hook
Custom button
900M Internal
Antenna
Port for Recovery Mode
Switch
● SA: 3 positions; Short Lever
● SB: 3 positions; Long Lever
● SC: 3 positions; Long Lever
● SD: 3 positions; Short Lever
SH
● SE: 3 positions; Short Lever
SG
● SF: 2 positions; Long Lever
SC
● SG: 3 positions; Short Lever
SD
● SH: 2 positions; Momentary, Long lever
Slider
You can choose the Switch and define its
position in the HARDWARE menu.
Stick
1. USB port is for upgrading, reading/
writing Micro SD cards and internal
memory of radio contents and charging.
(Micro SD card is not provided with
shipment.)
2. Smart Port is for firmware upgrade for
all FrSky S.Port devices.
Micro SD Card Port
Type-C USB Port
Earphone Port
ANT2
Ext. 5.8G Antenna
HDMI Output
Smart Port
Training port
ANT1
Ext. 5.8G Antenna
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for FrSky TANDEM X20 HD
Summary of Contents for FrSky TANDEM X20 HD
- Page 1 Instruction Manual for FrSky TANDEM X20 HD (UpKit) Introduction FrSky Tandem X20 series HD radio system provides the perfect solution for FPV flying and pilots preferring an easier operation with fewer devices. The HD version of the X20 radio system includes an integrated FPV screen supporting 720p 60FPS video quality, removing the need for a standalone FPV screen.
-
Page 2: Specifications
Instruction Manual for FrSky TANDEM X20 HD (UpKit) Specifications ● Dimension: 213*200*95 mm (L*W*H) ● Weight: 833g (without battery) ● Operating system: ETHOS ● Internal RF module: TANDEM ● Number of Channels: 24 channels ● Operating Voltage Range: 6.5 ~ 8.4V (2S Li-battery) ●... - Page 3 Instruction Manual for FrSky TANDEM X20 HD (UpKit) Gimbal adjustment (UpKit version) Unscrew the four screws on the back cover of the remote control, open the back cover of the remote control, you can adjust Gimbal. Install the screw Install the screw...
- Page 4 With ETHOS Suite, you can update the radio bootloader, firmware, SD card, flash, and also convert image format and audio format. Find the latest infomation and download the ETHOS Suite at ethos.frsky-rc.com/. Note: To use the ETHOS Suite application with a FrSky radio, please always keep the radio bootloader with the latest version.
- Page 5 Instruction Manual for FrSky TANDEM X20 HD (UpKit) ETHOS Operating System Create the model STEP 1: Enter into Model Select, then select the model type. Create a new model. STEP 2: Configure the model channel. Name the model and set the model picture.
- Page 6 Instruction Manual for FrSky TANDEM X20 HD (UpKit) Then turn the state of Internal RF to On. Set the binding mode for the Internal RF module correspond- ing to the receiver (ACCST D16, ACCESS, TD MODE). STEP2: Channel Range Setting...
- Page 7 Instruction Manual for FrSky TANDEM X20 HD (UpKit) STEP4: Registration For TD Mode as an example, select the Set [Register] When the "RX Connected" page pops up, press the for getting the radio into Registration status in the RF [REGISTER] to complete the Registration procedure System-Internal Module tool, then press the F/S and then power the receiver off.
-
Page 8: Range Check
Instruction Manual for FrSky TANDEM X20 HD (UpKit) Range Check A pre-flight range check should be done before every flight, in case the signal loss is caused by the reflection of the signal by the nearby metal fence or concrete, and the shading of the signal by buildings or trees during the actual flight. -
Page 9: At The Flying Field
EEPROM memory (which does not require periodic replacement) and of a battery, it still should have regular check-ups for wear and tear. We recommend sending your system to your FrSky Service Center annually during your non-flying-season for a complete check-up and service. - Page 10 Never fly if lightning is expected. Updates FrSky is continuously adding features and improvements to our radio systems. Updating (via USB Port or the Micro SD card) is easy and free. To get the most from your new transmitter, please check the download section...
Need help?
Do you have a question about the TANDEM X20 HD and is the answer not in the manual?
Questions and answers