Key Board; Audio Out - Yaesu FTDX-9000MP Operation Manual

R P
EAR ANEL
COM
Connect a GPS receiver capable of supplying NMEA
data (not supplied) to this jack. When you connect the
GPS receiver to this jack, the FT
tomatically set your current location automatically into
the "World Map" page of the External Display (not
supplied).

KEY BOARD

Connect your keyboard (not supplied) to one of these
jacks in accordance with your keyboard type ("USB"
or "PS/2") to use the Smart Memory Card for storage
of logbook data, and for input of your location when
setting up the World Clock.

AUDIO OUT

This terminal is for future expansion of the
transceiver's capabilities. It is designed for connec-
tion to a computer's sound card input, but at this time
it is not supported.
Page 38
9000MP will au-
AUDIO IN
This terminal is for future expansion of the
transceiver's capabilities. It is designed for connec-
tion to a computer's sound card output, but at this
time it is not supported.
DISPLAY
Connect an External Display (not supplied) to this
jack.
USB Jack
This jack supports the USB 1.1 protocol, for connec-
tion of a USB keyboard.
Note
Other types of USB-related accessories (other than a
keyboard) are not supported by this jack, and must
not be connected here.
FT 9000MP O M