Call Screening; Number Of Rings - VTech 6325-3 User Manual

Answering system settings

Call screening

You can hear incoming messages at the telephone base while they are being
recorded. Follow the below steps to turn this feature on or off.
To turn on or off with a handset:
Press MeNU/
1.
Press /
2.
VOL
/SeLeCT.
MeNU
Press /
3.
VOL
/SeLeCT.
MeNU
/SeLeCT to highlight > Call screening.
4. Press
MeNU
Press /
5.
VOL
/SeLeCT.
MeNU
If call screening is set to On while the answering system is answering a call,
•
press VOL/
lowest setting will mute call screening for that call.
If call screening is set to Off while the answering system is answering a
•
call, press
screening on. Continue to press
level for that call.

Number of rings

You can choose from two, four, or six rings; or toll saver. With toll saver
selected, the answering system answers after two rings when you have
new messages, and after four rings when you have no new messages. This
enables you to check for new messages and avoid paying unnecessary long
distance charges if you are calling from out of your local area.
Press MeNU/
1.
2. Press /
VOL
/SeLeCT.
MeNU
Press /
3.
VOL
/SeLeCT.
MeNU
Press /
4.
VOL
/SeLeCT.
MeNU
5. Press /
VOL
/SeLeCT to confirm your selection.
MeNU
when the handset is not in use.
SeLeCT
to highlight > Answering sys, then press
/
or
VOL CID
to highlight > Ans sys setup, then press
/
or
VOL CID
to choose > On or > Off, then press
/
or
VOL CID
on the telephone base to temporarily decrease the volume. The
/VOL once on the telephone base to temporarily turn the call
when the handset is not in use.
SeLeCT
to highlight > Answering sys, then press
or /
VOL CID
to highlight > Ans sys setup, then press
/
or
VOL CID
to highlight >
/
or
VOL CID
or / to choose from 6, 4, 2 or Toll saver, then press
VOL CID
/VOL to increase the volume to the desired
#
of rings, then press
17