Table Of Contents - H3C UniServer R4970 G7 User Manual

Status = Success
Description = None
Controller Properties :
=====================
---------------------------------------------
Ctrl_Prop
---------------------------------------------
PR Mode
PR Execution Delay
PR iterations completed 1
PR Next Start time
PR on SSD
PR Current State
PR Excluded VDs
PR MaxConcurrentPd
---------------------------------------------
Configuring consistency check parameters
Perform this task to view and configure consistency check parameters.
Syntax
storcli64 /ccontroller_id
storcli64 /ccontroller_id
storcli64 /ccontroller_id
storcli64
starttime=start_time
Parameters
controller_id
ID is 0 by default. If multiple storage controllers exist, use the
to view the controller ID.
: Specifies the target RAID ID.
raid_id
: Specifies the action to take. Options include
op
delay_time
start_time
Usage guidelines
If you do not specify the /vraid_id option when executing the
command displays the consistency check parameters. If you specify the
command displays the specific check progress.
Examples
# View the consistency check parameters.
[root@localhost home]# ./storcli64 /c0 show cc
CLI Version = 007.1017.0000.0000 May 10, 2019
Value
Auto
168 hours
03/19/2022, 15:00:00
Disabled
Stopped
None
32
[
/v
/v
/ccontroller_id
: Specifies the ID of a storage controller. If only one storage controller exists, the
: Specifies the consistency check cycle.
: Specifies the start time.
]
/vraid_id show cc
raid_id start cc force
p
raid_id o cc
set
,
pause resume
165
cc=conc delay=delay_time
storcli64 /call show
, and .
stop
storcli64 show cc
/vraid_id
command
command, the
option, the