Advertisement
Creating RAID 0 logical drives automatically
Perform this task to set up RAID 0 logical drives with all drives in Unconfigured Good state.
NOTE:
The LSI-9540 storage controller does not support this feature.
To create RAID 0 logical drives automatically:
1.
On the storage controller configuration scree, select Configuration Management and press
Enter.
Figure 216 Storage controller configuration screen
2.
Select Auto Configure RAID 0 and press Enter.
125
Advertisement
Troubleshooting
Need help?
Do you have a question about the UniServer R4970 G7 and is the answer not in the manual?