Physical Description - Vivotek FD8133 User Manual

VIVOTEK

Physical Description

Light Sensor
Lens
MicroSD/SDHC
Card Slot
Reset Button
General I/O Terminal Block
This Network Camera provides a general I/O terminal block which is used to connect external
input / output devices. The pin definitions are described below.
MicroSD/SDHC Card Capacity
This network camera is compliant with MicroSD/SDHC 32GB and other preceding standard SD
cards�
Hardware Reset
The reset button is used to reset the system or restore the factory default settings� Sometimes
resetting the system can return the camera to normal operation� If the system problems remain
after reset, restore the factory settings and install again�
Reset: Press and release the recessed reset button with a paper clip or thin object� Wait for the
Network Camera to reboot�
Restore: Press and hold the recessed reset button until the status LED rapidly blinks� Note that
all settings will be restored to factory default� Upon successful restore, the status LED will blink
green and red during normal operation�
4 - User's Manual
Black Cover
IR LEDs (8 units, distance 10m)
(FD8134 only)
Status LED
Pin Name
+ Digital Iutput +
- Digital Iutput -
General I/O Terminal Block
Ethernet 10/100
RJ45 Plug
Power Cord Socket