Advertisement
Quick Links
Quick Guide
Operating the product
Read "Safety Instructions" section first!
1
1. On / Off Button
2. Program Selection Button
3. Low Salt Warning Indicator
4. Low Rinse Aid Warning Indicator
5. Program Running Indicator
6. Display
7. Function Selection Button
F1
Hygiene Care function
F2
Steam Shine Function
F3
TrayMaster Function
F4
TimeDelay Function
F5
Express Function
F6
Half Load function
8. Start/Pause/Cancel Button
9.
Doormatic Function
10.
Doormatic Indicator
11.
(Not in use)
12.
Child (Key) Lock Indicator
13.
Child (Key) Lock Function
Do not touch the machine display with
wet hands.
The buttons cannot be operated when
the door is open. Make sure the door is
closed for the buttons to operate.
2
3
P1
P2
P3
P4
P5
P6
13
12
6
5
4
7
F1
F2
F4
F5
9
11
10
8
F3
F6
1/EN
Advertisement
Related Manuals for Grundig GNUP4530D
Summary of Contents for Grundig GNUP4530D
- Page 1 Quick Guide Operating the product Read “Safety Instructions” section first! 1. On / Off Button 2. Program Selection Button 3. Low Salt Warning Indicator 4. Low Rinse Aid Warning Indicator 5. Program Running Indicator 6. Display 7. Function Selection Button Hygiene Care function Steam Shine Function TrayMaster Function...
- Page 2 2/EN...
-
Page 3: Additional Functions
Additional functions Some auxiliary functions cannot be used together. If the function you Washing programs of the machine are selected is not active even though it designed to achieve the best cleaning appears in the "Program information performance by considering the soil level, and average consumption values the amount of dirt and the characteristics of table", you can activate it after turning... - Page 4 Tablet Detergent Function (T) Half Load function (Y) (depends on the model) (depends on the model) Depending on the mains water hardness, It is used when you want to run your it provides better drying performance machine without fully fill it. in washings made with multi-purpose 1.
- Page 5 TurboWash function (Z) Express function (F) (depends on the model) (depends on the model) The TurboWash By enabling the selected program to wash impeller located under at higher pressure and temperature, it the lower impeller shortens the washing time and reduces the ensures that your amount of water.
- Page 6 SelfCare Doormatic (Depends on the Model) (depends on model) Thanks to the “ Doormatic ” feature on your This programme is recommended to be machine, the drying effectiveness of your operated on each 1-2 months for machine machine is improved and power is saved. cleaning and necessary hygiene.
-
Page 7: Adjusting The Water Softening System
Quick Guide Adjusting the water softening system Washing, rinsing and drying performance of your dishwasher will improve when the water softening system is adjusted correctly. To adjust the system, first learn the water hardness in your region and adjust as indicated below. - Page 8 Perform the same hardness level adjustment that you have set on the control panel also with the regeneration adjustment switch. For example, if you have adjusted to “3” in the control panel, also set the regeneration adjustment switch to 3. Regeneration Adjustment Switch Level 0 Level 1...
Need help?
Do you have a question about the GNUP4530D and is the answer not in the manual?
Questions and answers