Battery Removal; Battery Charging - UTStarcom CDM8955 User Manual

BEFORE USING
H BATTERY REMOVAL
 Push down the release latch button, then slide the
battery cover off the phone.
 Lift the battery up and out of the battery cavity
from the down of the battery.
If the battery is not correctly placed in the compartment,
the handset will not turn on and/or the battery may detach
during use.
14
BATTERY USAGE BATTERY USAGE
H BATTERY CHARGING
 Plug the AC Charger into a standard outlet.
 Plug the other end of the AC Charger into the
bottom of your phone. The battery must be
installed onto the phone.
• When you charge the battery with the phone power off,
you will see a charging status screen. You cannot operate
the phone until it is powered on.
• The battery is not charged at the time of purchase.
• Fully charge the battery before use.
• It is more efficient to charge the battery with the handset
powered off.
• The battery must be connected to the phone in order to
charge it.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to
replace the battery.
BEFORE USING
15