Battery Removal; Battery Charging - UTStarcom CDM8960 User Manual

BEFORE USING
H BATTERY REMOVAL
 Push down the release latch button, then slide the
battery cover off the phone.
 Lift the battery up and out of the battery cavity.
16
BATTERY USAGE BATTERY USAGE
H BATTERY CHARGING
 Attach the charger to the phone. Make sure that the
triangle symbol faces up when inserting the plug into
the Charger / Headset port.
 Make sure the battery is attached to the phone before
charging.
• When you charge the battery with the phone power off,
you will see a charging status screen. You cannot operate
the phone until it is powered on.
• The battery is not charged at the time of purchase.
• Fully charge the battery before use.
• It is more efficient to charge the battery with the handset
powered off.
• The battery must installed in to the phone in order to
charge it.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to
replace the battery.
BEFORE USING
17