UTStarcom CDM8955 User Manual page 52

Utstar cdm8955: user guide
Table of Contents

Advertisement

MENU FUNCTION
WAKE-UP
Use to train or untrain the Voice Recognition with the control
word, "Wake-Up".
 Press
[MENU]
 "Please hold phone to ear and follow
instructions" will be displayed and you will hear
"Now training control words. Please say the word
Wake-Up".
 Say "Wake-Up". You will hear "Again".
Say "Wake-Up" again. You will hear "Training
word successful".
UNDO TRAIN ALL
Undo Train All erases all "Trained" words.
 Press
[MENU]
 "Undo voice recognition for all procedures?"
will be displayed. To undo all trained words,
press
[OK].
100
UTILITIES
,
,
,
.
,
,
,
.
UTILITIES
VOICE SETTING
Select Set Active to activate voice-dial. If the handset is connected
to HFK, select HFK to activate voice-dial by simply saying "Wake-
Up".
 Press
[MENU]
 Under "Set Active", select "Off", "Active Flip" or
"Clear Key".
Clear Key : Voice Dialing can be activated by pressing
and holding in idle mode.
Active Flip: Voice Dialing can be activated after the
flip opens.
Off : Voice Dialing canceled.
 Under "HFK Mode", select "On" or "Off", then
press
[OK] to save it.
When Clear Key is set to be the activation key
1. Press and hold
Recognition mode.
2. Say the indicator, such as a person's name you saved for
the number you are calling.
MENU FUNCTION
,
,
.
until your phone turns to Voice
101

Advertisement

Table of Contents
loading

Table of Contents