Spring SPIRIT Manual page 23

6 Operation
6.1 Use
Risk of burns or injury!
Do not touch the glass ceramic plate as well as the grill plate immediately after use, the surfaces
are hot.
- Place the appliance on a stable, flat and heat-resistant surface, according to chapter 5.1 Installation site
requirements. If necessary, use a washable, sufficiently heat-resistant mat to protect sensitive surfaces from
possible spatters.
- Ensure that the appliance stands plane on all 4 feet and that the openings for air supply and outgoing air are
not covered.
- a. Use as a tabletop grill: Place the grill plate with the grooved side facing upwards on the appliance.
- b. Use as an induction hob: Place the cookware directly on the glass ceramic plate. The circular marking is
for your orientation to activate the pot detection.
- Insert the mains plug of the power cord into a suitable socket according to chapter 14 Technical specifications.
The On/Off button blinks. The appliance is in standby mode.
- Press the On/Off button to switch on the appliance. The On/Off button lights up. The display shows 00 and
the thermometer for heating mode.
- You can select the power level between 00 and 09 using the regulator knob. For rapid heating, press the
power button T. In the display appears TURBO, the thermometer symbol and power level 10.
- Use high power levels for a short time only for quick preheating, when searing or for rapid boiling.
Risk of burns or injury!
Heat grease or oil slowly and under supervision only to avoid overheating. Overheated oil/grease
can ignite spontaneously. Fire hazard. Do not extinguish burning oil/grease with water.
- To activate the timer, press the TIMER button. The TIMER button lights up. The clock symbol appears in the
display. As long as the digits are flashing, you can set the time between 00-99 minutes using the regulator
knob. The set time is shown in the display. Then the display alternates between power and time. After the set
time has elapsed, the appliance switches off. To deactivate and to change the timer beforehand, press and
hold on the TIMER button. The time will be reset and can be set again using the regulator knob.
- After use switch off the appliance by pressing the On/Off button. Then pull the mains plug of the power cord
from the socket.
- Let the appliance cool down completely.
23