Hammer Configuration - Gigabyte GA-2CEWH User Manual

Hammer Configuration

Advanced
Hammer Configuration
HT-LDT Frequency:
MTRR Mapping Methods:
Memhole mapping
ECC:
ECC Scrub Redirection
4-bit ECC:
DCAHE ECC Scrub CTL:
L2 ECC Scrub CTL:
Dram ECC Scrub CTL:
F1: Help : Select Item
Esc: Exit : Select Menu
HT-LDT Frequency
Manually select HT-LINK frequency.
Options
PhoenixTrustedCore(tm) Setup Utility
[100MHz]
[Continuous]
[Hardware]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
+ -: Change Values
Enter: Select
Figure 2-4: Hammer Configuration
200MHz, 400MHz, 600MHz, 800MHz, and 1000MHz (Default values)
4 5
Item Specific Help
F5: Setup Defaults
Sub-Menu F10: Save&Exit
BIOS Setup