Parallel Port - Gigabyte GA-2CEWH User Manual

Parallel Port

This allows users to configure parallel port by using this option.
Enabled
Disabled
Mode
This option allows user to set Parallel Port transfer mode.
EPP
Bi-directional
ECP
Base I/O Address
378
278
3BC
Interrupt
IRQ5
IRQ7
DMA Channel
DMA1
DMA3
Enable the configuration. (Default value)
Disable the configuration.
Using Parallel port as Enhanced Parallel Port. (Default)
Use this setting to support bi-directional transfers on the parallel port.
Using Parallel port as Extended Capabilities Port.
Set IO address to 378. (Default value)
Set IO address to 278.
Set IO address to 3BC.
Set the Interrupt to IRQ5.
Set the Interrupt to IRQ7. (Default value)
Select DMA1 as DMA channel.
Select DMA3 as DMA channel.
5 7
BIOS Setup