Table of Contents
Advertisement
NOTE!
WARNING!
EVGA Corporation 2900 Saturn St. Suite B, Brea, CA 92821
Phone: 888 / 881-EVGA - 714 / 528-4500 - Fax: 714 / 528-4501
When you install the DIMM modules fully into the DIMM
socket the eject tab should be locked into the DIMM
module very firmly and fit into its indention on both sides.
When the DDR SDRAM CLOCK is set at 266MHz, use only
DDR2
533
compliant
motherboard operates at 266Mhz, most systems will not
even boot if non-compliant modules are used because of
the strict timing issues involved, if your DDR2 Modules
are not DDR2 533-compliant, set the SDRAM clock to
133MHz to ensure system stability.
Page 14
DDR
Modules.
When
this
Advertisement
Table of Contents
