G31-M4 BIOS Manual
ECP Mode DMA Channel
This item allows you to select parallel port ECP DMA.
Options:
DMA3 (Default) / DMA0 / DMA1
Parallel Port IRQ
This item allows you to select the IRQ for the onboard parallel port.
Options:
IRQ7 (Default) / IRQ5 / Disabled
Restore on AC Power Loss
This setting specifies how your system should behave after a power fail or interrupts
occurs. By choosing Disabled will leave the computer in the power off state.
Choosing Enabled will restore the system to the status before power failure or
interrupt occurs.
Options:
Power Off (Default) / Power ON / Last State
Hardware Health Configuration
This item shows the system temperature, fan speed, and voltage information.
Advanced
Hardware Health Configuration
H/W Health Function
Shutdown Temperature
CPU Temperature
System Temperature
CPU FAN Speed
SYS1 FAN Speed
+12.0V
+5.00V
CPU Vcore
Chipset Voltage
DDR Voltage
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
H/W Health Function
If with a monitoring system, the system will show PC health status during POST
stage.
Options:
Enabled (Default) / Disabled
BIOS SETUP UTILITY
[Enabled]
[Disabled]
10
Enables Hardware
Health Monitoring
Device.
Select Screen
Select Item
+-
Change Option
F1
General Help
Save and Exit
F10
Exit
ESC