Table of Contents
Advertisement
MDA Access Control [AGP]
Selects the MDA Access cycles direction.
Configuration options: [AGP] [PCI]
Primary Video [PCI]
This option switches the PCI Bus scanning order while searching for a video card.
This allows the user to select the type of Primary VGA in case of multiple video
controllers. Configuration options: [PCI] [AGP/Onboard]
Onboard TV-out format [PAL]
Allows you to set the onboard TV-out standard.
Configuration options: [PAL] [NTSC]
2.4.2 Onboard Devices Configuration
Onboard Floppy Controller [Enabled]
Allows you to enable or disable the onboard floppy controller.
Configuration options: [Enabled] [Disabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to set the address for the onboard serial port (COM1).
Configuration options: [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Serial Port2 Address [2F8/IRQ3]
Allows you to set the address for the onboard serial connector (COM2) connector.
Configuration options: [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
2-14
Chapter 2: BIOS information
Advertisement
Table of Contents
